How to Clean a Samsung Printer Fuser

How to clean the fuser rollers in a laser printer Samsung ML-1660 ML-1665 ML-1670 ML-1675 ML-1860 ,L1856W ML-2160 ML-2165 M-2020 X-Press M2070 and other, without disassembling the printer.

For any question or suggestion leave a comment
--------------------------------------------
Link Accessori srl
Via Beverara 224/7
40131 BOLOGNA (Italy)

other links:

-------------------------------------------------------------------------

[wtbi]

Thank you for taking the time and trouble to make this video. It helped fix my problem. Somewhere, sometime on the interwebs I will buy you a beer

[RubenSada]

MÉTODO RESET FUSOR:
Lo probé en una Samsung 5010 y funciona perfectamente para hacer el RESET del FUSOR.
La secuencia completa es:
MENÚ
#1934
MENÚ
Entras al modo TECH y vas a DATA SETUP.
Luego eliges COUNTER RESET. Le das OK.
Eliges FUSOR y le das OK.
Y así todos los que quieras restear. (Tray 1, etc)
Finalmente apagas y vuelves a encender la máquina.
El contador del fusor estará en CERO.

[Kristoffer]

Wow i never knew. Thank you for the info!

[guyantequera]

Hello Viandant ! Thanks to help me . I have a CLP310, when the paper goes out the toner does not stick on the paper. Is this a problem of the heated roller ? Thanks a lot

[diddy]

do you have a video on how to replace the pressure roller? the orange one? I have the piece but absolutely no idea of how to do it.

[notnorman]

thank you, i was getting repeated "chain" appearing marks on my papers, this took care of it.

[zounds]

You suggested we ask questions. All of a sudden, I'm having having trouble with my Samsung laser printer. The light is green...and printer starts to work, but then stops...yet, I can find no stuck paper or other obvius problems. I need a new toner cartridge, btw, but with a little shake-up have been hanging in there with this puppy....until I can get to ordering the cartridge. Any idea what this might be? THANKS.

[marylinforbes]

RE CLP415-NW SAMSUNG LASER - I've endeavoured to release sticky label that broke off and perhaps impacted within the fuser area. A small piece was retrieved but there remains fragments that are preventing release. All other areas a clear. I've been tempted to unscrew top over to get better access. Would that help?

[nemo]

Can we use the ethyl alcohol to clean the fuser instead of the isopropyl alcohol?

[wahajtrading]

Please share how to upgrade firmware via usb in dead mode or in starting problem, samsung scx 6545, 55n and also share shot codes like nvm initiliaze or hard reset in non working mode

[marcomill]

Hello Viandant. Thanks for the video. I don't know why, but the toner seems not to properly attach to the paper. When i pass with finger it go away. Do you think it can be the fuser roller? Thank you

[oneundecided]

Hello, I have Samsung CLP300 colour laser printer and it gives me a paper jam just before the fuser it is happening when the paper is trying to enter the fuser and when I open the back cover I can see the paper all wrinkled and the toner on it is not developed. May I ask you how this can be fixed. The paper is not even entering the fuser and jams. Should I clean the fuser rollers or do something else? Thank you!

[madametrafficjam]

should the pressure roller be completely smooth? mine is uneven, like small ripples in the rubber, is this normal or does it mean it's ruined? the roller looks clean but I still get horizontal (not vertical) lines when I print that seems to correspond to these uneven places on the roller. (ML-1660)

[Verdigo]

I have a CLP-415NW and Im getting blue spots on all pages that are the same size shape and position. I checked the toner cartridges and cleaned the rollers of excess toner. I don't see any defects in the green roller but the spots persist. What else do I need to check or clean? Thanks.

[TheDerek]

So the red one is the pressure roller and the one above it is the heated roller? Do both rollers get cleaned?

[cjallison]

Very helpful video. Uncomplicated and asy to follow.

[javiersanchez]

hello can guide me.... I have a samsung printer ml 2955dw that when you turn on the orange light on the panel is highlighted and a paper jam message appears inside the printer but it does not have any jammed paper. the fuser rollers is clean.

[stewartsstewart]

do you have any videos on how to change clutch on samsung xpress printer?

[gnomes]

Hi guys, my C1860FW is scorching the paper down both sides? do i need to replace the fuser or is that built into each of the toners?

[MainhoonGiyaan]

Sir, could you please provide the online buying link of the fuser assembly unit of Samsung ML1676p