How to Install, Adjust and Use a Land Pride Quick-Hitch

In this video we're going to show you how to install and adjust a Land Pride Quick-Hitch to easily swap from one piece of equipment to another. We're going to show you how easy it is to attach Non-PTO shaft and PTO shaft equipment once all the correct adjustments have been made.

[KubotaTractorTherapy]

This has to be the best video on YouTube showing exactly how to install the Kubota quick hitch. I'm happy it didn't fit the first time and you had to do the adjustments, so this teaches us how to do it ourselves. Thanks so much for this great tutorial ! 👍😁

[durwoodfoote]

I also appreciate that you showed to disconnect the tiller shaft from the pto while the the tiller is still suspended by the quick hitch. The first time I used my Land Pride tiller and tried to disconnect the shaft from the pto, I found that the shaft was binding and wouldn't detach. The reason was I had sat the tiller with the parking stand on the ground. When I elevated the tiller a bit with the quick hitch I found the shaft released from the pto shaft quite easily. Thank you for showing that miner step and ease of shaft removal from the pto.

[gunnutmike]

Best YouTube video about this I’ve seen so far. 👍🏼

[m.cooper]

Thanks. It's worth telling your customers that the bottom links are spring loaded. You do not have to lift up the two handles to connect to the bottom bushings. They snap into place once you are properly adjusted.

[apexjim]

Thanks for the video it was very helpful to a person new to the quick hitch. I have been used to bulling the implements to fit on the hitch. With my old age if this works as it should I will be able to switch from discs to the rotary cutter, box blade, and sprayer without throwing tools and having a tantrum.

[shotcee]

Totally awesome, detailed and to the point.

[marksleeper]

nice I just purchased one for my JD 4052R

[wildbillc]

I think this video sold me on ordering the quick hitch for my BX2680. Thanks for a really informative video on how it work and how to adjust it. I'm sure this quick hitch even having to adjust it for different implements still beats kicking 3 point arms into place.

Is there a way to lock the 3 point so its not raising and lowering with the mower deck on a BX? I know you can raise the mower deck to max height and turn the cutting height knob to max and it locks the deck so it doesn't raise and lower during 3 point use, but is there a way to lock the 3 point so it cannot raise or lower while mowing? I guess it doesn't matter if you don't have an implement on the 3 point, but I'd think there would be a way to lock the 3 point in the raised position regardless. Sorry for dumb questions, new to tractors.

[dannypierce]

I bought the qh15, not 100% happy with it, the land pride bow blade leans forward when sitting on flay ground so you have to put 1×4s under the front edge.
And my land pride rotary cutter is hard to hook up the pto because im a short guy and can't reach through to hook the drive draft up, so i purchased a pto extension male to female spline with a push pin to make it closer. I really think those 3 point lower arms with the quick attach ends would have been a better deal for me.

[joemommone]

I have QH10 & RCR1248 bush hog on order my question does a floating link come cutter or do angle bush braces get secured get connected QH when lifting QH to cutter, or do I need a floating link. Thanks great video, have also BB1260.

[howardhazelwood]

Thank you so much for the video. I have a Kubota 3301, so I would purchase the QH15?

[JCWren]

One thing that's not addressed is which of the 3 or 4 holes to use in the top center link. The manual for the L4701 says to use the lower-most of the 3 holes for a mower attachment (position control only, no draft). But the center link bar won't clear the PTO shield in the 3rd hole when lowered, although it will clear the middle hole.

Between the QH15 manual, the L4701 manual, and the RC1272 manual, it's very unclear exactly how the telescopic stabilizers and the center link should be set up. The RCR1272 manual says "The tractor’s lower 3-point arms should be adjusted for lateral float. Please consult your tractor’s manual." The L4701 manual makes ZERO reference to lateral float (although we can surmise it means the slots in the bars) but says the telescopic stabilizers should be set to "tighten", so there appears to be conflicting information.

[RichardGilbert]

I have a B2601 and am thinking of getting the smallest LP quick hitch, the 05. It looks easier to handle, and I am 65. But I wonder if that smallest hitch will work with my LP 1560 box blade? I am also getting a LP 5' rotary cutter and it needs to fit that. I notice the smallest hitch has slightly different dimensions than the bigger ones. Thanks for this video and thanks for any advice.

[martymabry]

My dealer included a QH05 on my l2501. I can not get it to latch both sides. Should I have gotten the QH15 instead?

[rossna]

Do you have to move the bushings from implement to implement?

[brandonbecker]

Looking for landpride quick hitch for bx1880

[juniordamron]

Why don’t you make a true category One hitch, with no bushings?

[ABBPA]

I just bought the QH05 quick hitch for my BX 23s. I have the land pride box blade, and the land pride rear blade. Do I need bushings for those implements?

[the-papaw]

Will these work on a 50's model TO35 Massey?

[talan]

Cmon man, hooking and unhooking a pto shaft with the engine running? You’ve got city boys watching you on here that are playing farmer with 5 acres and a BX for the first time in their lives. One of them bean poles gets twisted around a pto shaft or loses a finger thats how we get govt regulation safety switches that kill the engine when you get out of the chair. Be smarter fella.