How to Replace 1994-2004 Ford Mustang Convertible Rear Quarter window

thank you for stopping in and please subscribe and like this video

in todays video i am going to be showing you how to replace the rear quarter window on this 2004 Ford Mustang Convertible. this works on all mustang convertible from 1994 to 2004 or the SN95 and SN97 mustangs

thanks for watching!

[christopherpaskins]

People want to see how it was taken out and replaced.. huge gap in the process

[PanteraFan]

I'd been putting off going and getting one for the longest time. Thank you for sharing this video so much!

[AirplaneDetective]

Just writing down tools required...10, 11, 18, 13mm sockets, t20 torx, flathead, panel prayer or wire snips.

[barryharley]

Thanks for your video, Mike! This video was very helpful on how to get in to the quarter window. I'm finding the E6000 Self-leveling Formula - Medium Viscosity Glass-to-metal adhesive is the product to use for this project on these Mustangs rear quarter windows.
Youve already heard it but, the most important part was the reattachmet to the window motor frame was missed in the video and what was used. thanks again.

[scooter]

Really appreciate this video. With all the SN95 Mustang videos and write-ups out there, there are very few that deal with this issue. Also surprised at the lack of parts (quarter windows and regulators). Getting parts for these cars is usually not a problem.

[truplaya]

I have a 97 convertible mustang, you DO NOT need the quarter windows down to put the top down. ALL you need is the Parking brake engaged. Unless the 99-04 new edge requires the windows down for some reason.

[slowerosion]

my car doesn’t make me put the quarter windows down to put the top down? i have an 01 though. but thanks for this video, been searching forever to find it and saw you uploaded this 11 hours ago. a lifesaver!!! my passenger side quarter window needs replacing because of the weatherstrip. sooo not looking forward to this repair but so glad i found your video

[subaruamazon]

I heard a thunk when I closed my door. I tested the drivers side window. no problem. didnt test the rear window. what was it. what inthe door could make that thud as I closed my drivers door. I have to replace the hydralic lifts.should I replace my lines too? thx.

[jacaius]

I need help with my passenger quarter window it’s stuck up and won’t go down, I think the power switch works it could just be the motor

[royperrott]

Ivw got an 05 that had a quarter window that goes down but wont go back in and cant seem to figure it out

[malibuice]

Needed to get to the window wiring, thanks for this! Very helpful! 👌

Also, you dont need to let the windows down to let the top back, its recommended to do so to prevent any damage to the weather stripping, and you dont need to have the door closed. Only requirements are that the car is in park or neutral with the e-brake up.
My passenger window AND quarter window doesn't work when it gets too hot outside, it's a common problem on these models. This isn't a perfect car, but super reliable. I love my 00 vert. Wouldn't trade her for anything.

[stevenmorrison]

Mine broke from forcing it when the door handle lock broke trying to use the key . The other door has no key lock which is a crazy cut they did. And caused such a headache .

[marclevy]

Are you near NJ? Can you do this for me? Also my regulator is working so I just need the window with siliconed bracket attachment right?

[watchyoback]

Would It Be The Same For A 2005 Gt Covertible?

[AirplaneDetective]

First, thanks for posting this, I was able to get mine apart. The t20 At least on mine, you can substitute a nut driver to get it out. I am now trying to rebond my glass to the metal. Any idea how to do that?

[corrystucki]

How long did it take you to do the whole process!

[spartacus]

One motor operates back and front windows ?

[JeremyBurnett]

They were 10 mm on mine. It’s not the 40th anv edition though.

[prodbygustavo]

I wanted to see you mount the window back.. 😪

[benoden]

The issue I’m having, is the customer wants both windows working properly, the problem is that the parts I need are discontinued, I was able to get a couple regulators that work, however the right side gets caught on the rubber bushing in the door jam, the left quarter glass gets caught on the regulator itself, anyone have any suggestions on how to fix this issue? I’ve tried adjusting both glasses and I’ve been able to do these in the past no problem.