Do It RIGHT! How to Fix a Broken Window Pane

How do you replace the glazing in a single hung window? In this episode Jordan walks you through the process of replacing a broken window pane step by step.
Replacing a non-operable window pane can be slightly more complicated than in a window where the sash can be removed because you have to work on both sides of the wall, instead of simply removing the sash and working on a work bench.
However, it is steill a pretty simple straightforward task and can be accomplished in less than a hour if you have the right tools and know what to expect.
Here are the tools we used:

Step 1: Tape off broken window to prevent shattering and a messy cleanup
Step 2: Mask window frame to prevent silicone from squeezing out onto it
Step 3: Cut exterior retention beads and remove
Step 4: Cut interior silicone bead
Step 5: Remove broken pane with double ended window tool.
Step 6: Remove old silicone bead from window frame (be sure to keep the spacers!)
Step 7: Dry fit the new window pane and mask the interior next to the window frame to prevent excess silicone from contacting the glass.
Step 8: Apply silicone to exterior of window frame
Step 9: Set window on saved spacers
Step 10: Apply new exterior retention beads
Step 11: Clean Up!

[truckerjack]

Good Job! If you want the silicone not to make a mess, I cut the tip of the caulking tube smaller to start remember if you use a smaller cut to start with you can cut the tip bigger Until your ok with the amount of caulking coming out of the tube. And if you cut the tip to big and you make a mess, then you have to get a new tube and start over.

[anthonymehring]

I do this for a living. Cutting the bead is unnecessary and will actually take more time because you have to pull out the piece that is still in the slot after you cut it. Also, if you had simply used your green utility knife and made several careful and deep passes when cutting out the old silicone/double faced tape, there would be no need for the tape to hold the window together. Also using a ton of silicone is unnecessary, making the masking tape unnecessary. And if there is any that seeps through, just wait for it to dry and then cut it away with your knife, or clean it with a utility blade and glass cleaner as lubricant. Just be careful not to scratch the glass. Finally, if you are by yourself, cut the old silicone/double faced tape thoroughly before removing the bead from the out side. It’s a lot safer. Then when you remove the bead, just pull the double pane out with a L shaped bar prying into the rubber of the double pane, not the glass, and catch it. Also make sure that the black rubber blocks on the bottom are not stuck to the bottom of the old double pane, so you can set the new one on them for protection. Those are my suggestions. I literally did these steps on several windows at work, just today. I’ve done this thousands of times. Just some tips for you.

[justicefall]

I’ve always wondered how you replace the glass in a vinyl frame window. Thank you Jordan for taking the time to show us how it’s done and to save us from calling a glass repair shop! Another great video!!

[lexiemn]

Nice job. You explain the process very well.

[trshuster]

That job is no fun for sure. As an Andersen dealer we have to do it from time to time. Well done sir and best wishes on your new venture. I'll be subscribing.

[madelinepale]

hi Jordan will these steps work with a 4' x 5' center bay window

[freyalove]

I have a 3 roller impact glass window.My stationary window cracked. Is this works for roller impact windows? Are you familiar with CGI windows?.

[ricardotrujillo]

As clear as water, my friend. How I would order a new one, thanks, blessings.

[bradbrown]

How did you know the exact replacement specs? Does it take long to get the double pane replacement? Only Anderson, or is there a generic local option. Thx.

[DavidWilson-gtoq]

Being an Andersen Rep I say well done sir 👍.

[garygbur]

What brand / type of silicone did you use? Thanks!!

[butchtropic]

Is that double pane glass in a sealed unit? Where did you get it?

[mikeschiavoni]

Long sleave sweatshirt would have saved me some stiches today...

[phuongho]

Where do you buying the glass pane window? Could you help me.

[alejandroduarte]

Where did you get the replacement glass?

[Foche_T._Schitt]

If you do get silicone on the glass you can let it dry and then take it off with a razor blade. This way you don't dilute the silicone you need with water while it's curing.


Bonus tip: Best way I found to clean glass is with vinegar and newspaper.

[AA-rddz]

Where do i get a replacement wondow to put in?

[tikka]

I'm wondering if you are trying to get the glass to walk away from boredom?

[anthontwastwood]

Some times I use heat gun to remove caulking or adhesive from manufacturers, to remove glass!

[josebuitron]

Hi Jordon. I am in Austin and 6 windows that need glass replacement.. Can you do the repairs or can you recommend some one who can order and install, Thanks Jose