KINGrinder | Exterior Adjustment | Grind Setting | K4 | K6

[mitchelcline]

I like the part where there's no audio to explain anything.

[mitchelcline]

I could use my left eye to read the subtitles and my right eye to watch the demonstration. Or I could use both eyes to watch demo and both ears to hear. One seems better.

[JJ-ssvi]

I found this video misleading, its not clear what type of coffee this setting is suited to. All the instructions for grind settings on this grinder are quite difficult to follow for someone new to hand grinding. People refer to 'clicks', but they don't make clear what the starting point is. By figuring it out through trial and error, I found the start point of the grinder is as in this video, when the top part of the grinder is at the highest point and all the small numbers are fully visible. In this video they start from the highest point when all the small numbers are visible, then turn the grinder 2 full turns from zero and then to 30. This is too coarse for espresso and your espresso machine won't retain the required pressure. The setting for espresso, starting at the same highest level where all the small numbers are visible, is to turn it to the 45 mark (no turning it twice from zero as in this video). The highest level of the grinder when all the small numbers are visible gives the finest grind, the lower you turn the grinder (when the small numbers become less visible, the coarser the grind is. Someone needs to make some videos that clearly show how to set this grinder for different types of coffee.

[Sevenseas]

Here my notes I took from everything you said:

[LM-mqpj]

I'm confused. I turned my counterclockwise twice just like the video demonstration, but the top came off. Why?? Now, I can't reattach it. What's going on?

[ArshesNei]

So the adjustment is like using torque wrench? I love it.

[bombomu]

hi . I have got K6. Would you advice how many clicks used for v60, aeropress and french press? Thanks

[GudAction]

Whats the best adjustment for bialetti moka pot with k4? Thank u

[nasser]

I purchased and I dont now How many clicks for v60 ?

[etzygirl]

Please make shipping to Australia available. Looks amazing!!

[fatedzero]

I order a kingrinder k4 and the wood handle is not attached, is it normal?

[huutoanspkt]

I want to by K6 model. I'm from VietNam. what to do....

[harttakada]

hi, for k6 on my unit, the most tighten (Max can't be turn) position is way past 0, almost near 50 mark, so my count is calculate from the near 50 mark, or still from 0 ??? is it possible to recalibrate it?

so my setting of 0 is on 0 mark, on point.