The Best Budget PC Case | $60 GAMDIAS Aura GC1 Elite Review #computer #pcmasterrace #computercase

Показать описание

Buy the Aura GC1 Elite series of cases through my affiliate link which earns me commission for your purchase at no cost to you!

GC2
The system shown here has the following specifications.
CPU: AMD Ryzen 5 5600
GPU: XFX AMD RX580 8GB undervolted to 1200mhz core, 2100 memory, 1050MV
Memory: Teamgroup+Crucial 3200MHZ DDR4 memory CL22 (overclocked to 3600MHz CL20)
Motherboard: AsRock A320M-HDV R4.0, MicroATX, Socket AM4, A320 series chipset
Cooler: Noctua NH-D9L
SSD: WD Black 500GB NVMe SN750 (2020 model, no longer produced)
HDD: Seagate Barracuda 7200RPM 3.5 HDD 1TB (2012, no longer produced)
Power supply: Corsair CX750M (2021 Model)
2.5 Gigabit network card.

Рекомендации по теме

Комментарии

Hello!

I wanted to answer some common questions about this case that i may not have made clear in the video.

The Fans run purely off of a Molex connector, they do not have a 3 or 4 pin fan connector to connect to the motherboard or a fan controller. The fans in this model are not ARGB but rather have fixed color leds, even though ARGB is right on the box. The regular Aura GC1 does have ARGB, but the elite model shown here (the elite version has 340mm gpu length clearence whereas the regular version is 260mm) does have ARGB, but they do not use the same box.

This case does not have any vertical GPU mounts, only horizontial slots are present. You could potentially buy your own diy conversion kit and riser, but make sure that it wont leave the fans close to the glass, as this will hurt your cooling performance.

This case can fit up to a full size ATX motherboard, but i dont have any atx boards on hand to test fit, plus the system in the case is my main desktop.

The power supply can only be mounted fan side down, the holes needed for fan side up mounting are not present in the case.

The case can fit 3 120mm fans in the front, as it ships in that configuration, it looks like you could mount a 360mm radiator, but i dont have any to test fit. The top mount according to gamdias supports 2 120mm fans, but there is a second set of holes for 140mm fans, but i dont have any 140mm fans to test fit.

The front can according to the website accomodate 2 140mm fans, but there dont seem to be any mounting holes present for them, but thats not a big deal for most buyers as the case ships with four fans that are of good quality for the price, if you plan on replacing these upon purchase, you should spend your money on a case that includes less fans but maybe a higher built quality.

The rear fan slot can only accomodate a 120mm fan, there is one installed from the factory.

rysterstech

My husband bought me two cases to choose from. One of them is this exact case. I really wanted to see what it would look like with lights on. Yours is the only video I could find. Thanks!

amandaweichel

Nice upgrade with the camera and the way you review it. Good job!

emilkalchishkov

Great video my friend it is very informational, keep it up buddy

Woodengrass

7:15 important correction, you cannot install the power supply fan side up, as there screwholes do not line up. I tried to flip mine over for better cooling but it doesnt screw in.

rysterstech

Bro I recently purchased the same case, but I'm having trouble connecting the fans. Can you show me how to do it? 1. How should the fans be connected to the power supply? 2. Should they be connected to the RGB headers or the system fan headers on my motherboard?

ekremchafouzchotza

I have a question about the aura gc1 elite does it take fans on top and if it does how many and how manu mm and if i put there should i put the as exhaust on intske nice review btw and really helped

dmon_gg

What kind of connector do the fans in the pc require. My current motherboard does not have any RGB 3 pin headers, so i'm trying to find something compatible with it.

BennettPeterson-gp