IMBZBK Installation Video for Samsung Galaxy S22 Ultra Screen Protector

Hopefully this helps with your installation process!

[EZTechVidz]

1:56 I forgot to mention once you have the screen protector in place. Press firmly on the middle area that says "Corrective Fixation Strip".

[BartHogan]

BACKWARDS - do not install this way, it will most likely not be aligned, PUSH up from the bottom 1st, then down from the top, that way the alignment fixture on the bottom does it's job, otherwise the screen protector can slide all around while you are installing it.

[DustyGonzogas]

You're applying the protector backwards btw. Should do the top first and the bottom 2nd so the screen protector is still attached to the orange bracket until the top is stuck.

[KarenRudulph]

You did it backwards and made me mess up 2 of my screen protectors. I went back and watched the mnfr video, you did the bottom first, but your supposed to do the top first. Thanks, schmuck.

[FullMoonHowl]

Thank you! I was a bit overwhelmed by the written instructions; it's more involved than previous screen protectors I've bought.

[taflerA]

Without your tutorial I never would have been able to put the screen protector on. Thank you.

[Freddiesfans]

Thank you! The instructions are probably clear but seeing it made it so much easier! This is a slick system!

[mrjiggie]

So have you experienced the edges lifting because I have

[dwade]

This company created a WAY too confusing way to install this product. Thank you for giving me a way to install it that i could understand. No wonder they give you 3 screen protectors, the 1st and 2nd ones are for practice as i screw up trying to install them!

[tracywomble]

shouldn't you do the top first so that the orange device holds the screen protector in place? Otherwise, it slides around before application.

[Nisty]

Was their any resistance or delay when using the S Pen?

[Mike_The_Hog_A_Nator]

Coming from my 1st Android, the Note 10+ I found out the hard way that the outer display screen gets micro scratches very easily from just using the SPen.
I love these types of Screen Protectors for my S22 Ultra. I have Never been able to install a screen protector but with these? I've installed 3 perfectly! Problem- they only last a few weeks before they start peeling in one or more of the corners. I've tried 3 different brands but all are basically the same. My local Galaxy Store told me they used the same. Luckily they are all 3pks.
The ESR Individual Rear Lense Protectors are awesome also! The Spigen Neo Hybrid presion cut out rear lense Case fits perfectly but it's a tight fit. (you have to press down around the Lenses) I don't like the P Shape Lense Protectors

[acacius]

Well done with this. Great voice by the way.

[emeagain]

This works with the supcase Pro brill 👌

[rellrxse]

This is great and I actually used this to put it on, but I dropped my phone and the screen protector got cracked. Do you know how to take the protector off?

[bhupinderpalsingh]

Where do I get the lock screen wallpaper from ?

[dylansuaris]

Would this screen protector work fine with a case like the vrs terragaurd
Considering the edges?

[AZTechLabs]

i find a moist bathroom is best way so you have a bit of moister on the screen

[GTR]

I didn't see no one commented about the usage afterwards. So it's really more difficult to unlock using the fingerprint. I removed it and it works like it supposed to. Also after sometime the screen starts to gets loose and stretchy. I wouldn't recommend this screen protector.

[marekkowalski]

Hi, How is this protective film for the Samsung S22 ultra doing ?

The quality of this foil is good ?