How to Install a Dyna Glo Ventless Heater - An amazing vent free natural gas space heater!

If you're looking for details on this heater, you might find info on the affiliate amazon pages via the links above.

How to install a vent free gas heater: The 20,000 BTU vent free space heater from Dyna Glo can be made, on some models, to operate on both natural gas and liquid propane. However, this is an NG model only.

There is a gas fitting which I needed to buy separately to connect to my existing gas line.

This blue flame wall heater, is one of the best garage heaters natural gas. Installation and operation of the Dyna-Glo ventless heater is very easy, and it will prove to be a truly fantastic little heater.

Dyna Glo natural gas space heater review is here, consisting of this natural gas space heater ventless. A Dyna-glo signature series vent free gas heater install.

[williamscoggin]

Used to it was white Teflon tape for water and yellow Teflon tape for natural gas or propane.
But these days there is a third option which is a gray tape which is approved for water or gas. So if you can't find a yellow look for the gray.
FYI

[leonoraowens]

You just saved me...had mine installed yesterday and tried to turn it on this morning and turned the whole unit off..watched your video and now I'm back in business

[rblyel]

well done video. no wasted time with useless information ...well done!

[goinhot]

Looks like the sealant tape is put on counter clockwise. You wanna put sealant tape on clockwise, so it doesn’t try to unwrap when you screw it in.

[Kuderik]

Thanks for the video saved alot of time from RTFM!

[joshuawallingford]

When he used pliers instead of an adjustable it hurt my heart lol

[ericwitt]

Yessir I’m hoping to put one in the house it’s natural gas I’ve got one for my off grid cabin and we need to get more off the unreliable power grid here at home Ann we have is electric powered heating here

[f_youtubecensorshipf_nazis]

honestly shocked how pretty it is, partcular with the lights out. I wonder if painting the whole thing black would hold up. I may paint mine before I install it.

[FlameBlue]

You might want to use some pipe dope or thread sealer in addition to the thread tape, just a tip .

[christopherdozier]

Omg thank you so much for explaining everything!!! this is the best video I've seen for it

[vickiparrish]

Thanks so much for this informative video!

[qzorn]

o-my.... this makes more sense than the larry, moe, shemp and curly: this old house videos... 🤣 thanks a lot... 🥳

[justin-lqyn]

Good God almighty you don't own a wrench set or an adjustable wrench? Ate that fitting tf up

[aleciahoward]

He popped out the plug metal plug and it look like you need a big allen wrench how can I get it out I have an emergency it's cold and my furnace not working so I purchased this I have everything together but I can't get that plug out of the heater help me please thank YOU

[thebroham]

just went thru the whole install process, gas is on (i can hear and smell it)., ignition is working, but pilot will not light…. wondering what is wrong. last time i called a tech it was $160 for them to spend 5 mins at my house and tell me to get a new unit, which i just did

[bryson]

Can this be hooked up to a natural gas line in your house or does this have to run off propane

[TREN_FOR_BREAKFAST]

also purge the line with gas before hooking it up to the unit. this will help getting the pilot going faster

[kennyg-zxsp]

Looks like the tape was wrapped in the wrong direction.

[doctora]

The low setting (fully rotated) is too high for me. Can I put it to just past the pilot where the flame is very low ? Or does it have to be on one of the three settings ?

[Forsaken]

Does all the heat come out of the top? Can any be felt in front of the heater?