How To Replace Serpentine Belt 1984-2001 Jeep Cherokee

preview_player
Показать описание
Buy Now!

The serpentine belt delivers engine power to a number of your vehicle's critical accessories, like the alternator and water pump. Over time, the rubber belt can harden or crack and begin to slip or break. It's best to replace your serpentine belt at regular intervals. This video shows you how to install a new serpentine belt on your 1984-2001 Jeep Cherokee.

This repair was done on a 2000 Jeep Cherokee and the process should be similar on the following vehicles:
1984 Jeep Cherokee
1985 Jeep Cherokee
1986 Jeep Cherokee
1987 Jeep Cherokee
1988 Jeep Cherokee
1989 Jeep Cherokee
1990 Jeep Cherokee
1991 Jeep Cherokee
1992 Jeep Cherokee
1993 Jeep Cherokee
1994 Jeep Cherokee
1995 Jeep Cherokee
1996 Jeep Cherokee
1997 Jeep Cherokee
1998 Jeep Cherokee
1999 Jeep Cherokee
2000 Jeep Cherokee
2001 Jeep Cherokee

Tools you will need:

Check out our playlist:

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
Рекомендации по теме
Комментарии
Автор

√ *Watch the Video*
√ *Do it Yourself*
√ *Save Money*

TRQ
Автор

there is a different process for older jeeps with the 4.0, mine is a 91 and you need to loosen the power steering pump to get the belt off and new one on. you guys should change the title of the vid for the correct years.

FISHBREATHH
Автор

Great video to have as a refresher. I've got a 1993 Cherokee Country, but my son has been using it until he gets his act together financially. I called him today and asked if he had my tension pulley kit, which he does, so that was how I found out he still hasn't replaced the tension & Belt... Using an iPhone to watch YouTube video's reminds me of when my mother bought our first Television, with a 13'' screen...


I believe I'll call him back and suggest that he brings my Cherokee back home so I can at least watch him, while giving him some pointers...
Thanks again for the video, it helped me out a lot...

montydaniels
Автор

Warning if you have 1988. .This procedure will not work, as the power steering pump and adjuster are totally different. Thanks for posting and taking the time to do this very good. The adjust is is opposite and on the bottom of the pump.

mitchvass
Автор

Video says it's not necessary to remove the electric fan but just do it. It's easy and gives much better access.

doug
Автор

I just finished putting in a new water pump for the first time. I mean, I'm in the middle of the job. Just tightened the water pump, thermostat housing, and heat sensor. I've been hedging on putting on the serpentine belt. I thought it was more complex. The main thing is to have it really snug, and disperse the tension equally, throughout? Make sure the grooves are all aligned? That's it? I've almost got this thing fixed.

Well, unless the overheating is, after having replaced every part in the 4.0L cooling system, is that I've blown the head gasket.
Thank you for sharing your skills! This was clear, helpful instruction. & it Helped a lot!

tatjanabaker
Автор

Seems pretty easy when you do it. I will have to give it a try now, but I expect it won't be as smooth for me lol!

joshashdown
Автор

Straight and to the point thank you very much

robflavawitz
Автор

my 1996 4.0 cherokee is exactly like the video. no need to pull anything. 14 minute job start to finish.

otter
Автор

(Non Renix) TRQ this only applies to later models, as there has been changes. Doubt the title will be ever edited to reflect this.

Mauser
Автор

For the lower pulley (i think the alternator) i got under the car and pulled it around, was much easier for me

tonygrim
Автор

I have a 1989 Jeep Cherokee and I am not having this ease of putting the thermostat back in and loosening my serpentine belt. What year is your vehicle? I need help. 1989 Jeep Cherokee four-wheel drive as air conditioner

johncharles
Автор

Make the video in one take . You’ve cut the troublesome parts

jfergmma
Автор

False!
This does not include the year range given In the description

kennethmaccourt
Автор

Not how my 95 tensioner is… I just can’t remember where the keeper bolt is. Next video

VolReed
Автор

This video title is inaccurate. This is not how it's done for an older Cherokee from 1984 to around 1996

ujzkcxt
welcome to shbcf.ru