How to Replace Sway Bar Link 05-10 Pontiac G6

Buy Now!

In this video, 1A Auto shows you how to remove, replace, and install a sway bar end link. This video is applicable to the Pontiac G6 and Saturn Aura, model years 04, 05, 06, 07, 08, 09, 10.

This repair was done on a 2007 Pontiac G6 and the process should be similar on the following vehicles:
2005 Pontiac G6
2006 Pontiac G6
2007 Pontiac G6
2008 Pontiac G6
2009 Pontiac G6
2010 Pontiac G6

🔧 List of tools used:
• 18mm Wrench
• 18mm Socket
• 19mm Socket
• A Piece of Pipe (for leverage)

Check out our playlist:

⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[AAuto]

√ *Watch the Video*
√ *Do it Yourself*
√ *Save Money*

[AGeekydad]

Thanks for the helpful video. FYI, on my 08 Saturn Aura, the OEM bolt shaft requires a 6mm hex key to keep the bolt from spinning when removing the nuts, which were 19mm, not 18mm.
The Moog replacement part did require the 2 18mm wrenches as you had shown.

[tbone]

These cars must be notorious for broken sway bar links. Hey went on my 06.

[bryandoesyoutube]

do you have a video for rear stabilizer link removal for a 2007 g6 3.9l gtp

[horacecurtis]

hi i was changing my stabilizer bar i strip inside the hole nut turn how can i get it loose