Bilstein B8 struts with H&R Sport Springs | PART1

preview_player
Показать описание
Finally! The day has come! I am installing new suspension on my BMW F30 335i!
Bilstein B8 struts with H&R Sport Springs
This is PART 1 of 2!

FYI, you do not NEED the ECS Tuning Installation Kit - you can reuse all of your stock components if you want. I wanted to keep all of my stock suspension intact, so I opted to buy the ECS Tuning Installation Kit.

Suspension components:

Thanks for watching!
Don't forget to subscribe!
#AcceleratedMotion

Follow me on IG!
@thompsac_m3
Follow me on TikTok:
@thompsac_m3

Looking for discounts on parts?
DM me on Instagram @thompsac_m3 for discount codes from my sponsors!

SPONSORS:

DETAILING/GARAGE PRODUCTS:

GEAR:

(Prod. by HoobeZa)
Рекомендации по теме
Комментарии
Автор

I’m planning on running this on my 340i Msport! Excited!

hildaarmenta
Автор

Have to tackle this again in 100* weather New B8’s this weekend!

calessassracer
Автор

You know, it didn't look bad before the spring install. I'm not a tucked or zero-finger gap person, so I prefer some space btwn the tire and fender. Mild drops are the best (imho) as far as I am concerned. When you start going crazy low, you jack w/the suspension geometry then have to buy more pieces to compensate for that bad geometry...

Ksport
Автор

Nice video! Good work! I've noticed the tools used in your video...cand you make a description what did you use? THx

spownvl
Автор

how do i know if i have adaptive suspension? also if i do, would it make any difference of using the bilstein? i’m currently on h&r sport springs in stock suspension M sport and it’s decent ride quality, i just want a bit stiffer on highway roads sondes it’s my daily driver.

joealej
Автор

Hey are the front struts the same with the B8s? i was looking at the sway bar brackets and was confused when i installed mine.

jakecollins
Автор

hey! bro how is the comfort between Bilstein B8 compare to just H & super sports spring on stock m sport suspension. thinking going with this set but have doubts. also I rub a little on my passenger rear

ELf-xsbf
Автор

What’s the verdict on the H&R’s & B8’s? I’m on BC coilovers and there’s some bounce at low speed/ start-stop driving. I think the dampers are not very great and small bump sensitivity is basically non-existent. Considering your setup or H&R SS’s. Nice ride BTW. Thanks

JZLLA
Автор

I have stock BMW E 30 convertible 1987 stick shift - B6 with stock springs or B8 with H&R sport springs? Roads around where I live are nice... i’m OK with sportier feel, but I don’t wanna have it super hard like a go cart

sunnybeachweddings
Автор

Did yous torque 🔩 with wheel off ground not even jack suspension up at least .. that's strange 🤔

gezimbilali
Автор

You don't show how to build the struts!! We have these and our springs seem to be loose in them. Can you show how you put the strut and spring together

albundy
Автор

I have a 2018 330i with m sport package, could you recommend the best setup for me? Also how does making these changes hold up long term

dair
Автор

What was the drop of the springs on this setup?

malcolmn.
Автор

Does this work with electronic dampning?

la.mi
Автор

I thought proper measurement should be from the centre of the wheel/hub to the edge of the fender

raldyjimenez
Автор

How much is considered “lowered” ? I have h&r springs and my vehicle drops 1.75inches in the front and 1.50inches in the rear. They currently don’t make a B8 for my application so would i be good with just B6??

simplybuilt_
Автор

Question what does the strut connect to since mines rusted and would like to replace it but don’t know what’s it’s called it also holds the rotor I guess

sniperking