MY SHURE GLXD16+ REVIEW!

I messed up the names! The GLXD6+ is the receiver, the GLXD1+ is the transmitter and the GLXD16+ is the name of the entire system!

Time Stamps:
00:00 - Introduction
00:18 - Disclaimer
00:35 - The need for an upgrade
01:27 - Why I almost sent the Shure back!
02:34 - How to fix it!
02:54 - Shure vs. Line6!
03:05 - The Transmitter
05:06 - The Receiver
08:02 - The Big Question!
10:14 - Form factor on my board
10:29 - Conclusion

Social media and contact
————————————————
————————
————————
————————
————————
Email: erikarko (at) gmail (dot) com

My bands:

[erikarko]

I messed up the names! The GLXD6+ is the receiver, the GLXD1+ is the transmitter and the GLXD16+ is the name of the entire system!

[scottrock]

You legend. 🤘🏻🤘🏻🤘🏻 the exact issue I was having charging. Thank you

[georgeworthmore]

My whole band uses them. we love them. I just got the new plus...even better. Not a single issue

[davidzimmermann]

I just realize that I have the same problem as you, after the whole night, the battery always blinks red. I'll try to reboot next time I get the occasion. Thanks to mention this!

[panicrev]

I just got one myself and the charging was wonky. The manual says the light on the remote pack should be red while charging and green when it's finished. Mine flashed red the whole time it was charging. I just finally took it off the charger after more hours than it was supposed to take to charge and the base unit says it's fully charged. I've played it a few hours now and the battery strength indicator hasn't moved. I'll try your re-boot and see if that fixes it. Thanks!

[KeannuReevezzz]

the g70 does not bypass the wireless function when a cable is plugged into the aux in, it would only bypass the wireless function if a signal is going through the aux input.

[capedukewuhaha]

The Line 6 G70 also scans which channel is the most reliable. Scroll through 'Channels' in Edit and the last should be 'scan' ...then you take the one with the least interference. So NOT the one with the biggest bar symbol. The one with the smallest. Do this at the soundcheck and probably double check when the room is crowded and you'll never will have any dropouts.

[Exaltation-heliacal]

Maybe use a $26 lav mic. They handle proximity better. The 180hz bump sounds awful on the sm7b. Your not a baritone. .
And you won’t drive up the cost of the sm7. Sm7b is not even close to the same mic

[peterschaefer]

Latency is pretty high. In this stage of technological level, there should not be even half that latency of 4.5 ms.

[dirtychinchilla]

Hey, you can but alternative cables with the mini XLR on. I didn’t buy one, but I bought a right angle jack and swapped the straight jack out for the right angle one. Works flawlessly

[roberthealey]

Will you be adding a 2nd one to use with your attitude?