How to Install a Dump Valve / Blow Off Valve BOV

preview_player
Показать описание
How to install a Blow of valve aka BOV or Dump Valve in simple easy steps

Рекомендации по теме
Комментарии
Автор

Couple things, Installed backwards. Also when adjusting the valve tighter/harder the more boost pressure your vehicle should have to dump off. Example Forge BOV recommends 17 clicks clockwise for 7-11 lbs of boost (stock is 8-10) If you are tuned to 18lbs (stage 2) Turn it 26 click forward. The more boost/power you make the better and bigger the valve should be because you dont want to be releasing 25+ psi from a little bov. Also if you hear a flutter thats actually your bov leaking indicating youve installed it wrong. It should make a solid swoosh noise. The flutter comes from a turbo filter which stock 1.8t dont come with.

tunersparadise
Автор

The purpose of a blow off valve is to dump all the boost pressure when letting off the throttle but those are installed on the charge pipe after the compressor. This is installed before the compressor so it doesn't actually do anything.

chzecrepublican
Автор

HAHAHAHAHAHA took 8months?!? lost my shit right there hahahahahah

NjoyMoney
Автор

Everyone thanking you for showing them how to install it backwards! LOL

tonyoestreich
Автор

He said this is really really easy to install and he installed it WRONG!! lolololol 😂

MikeSimOle
Автор

Can I install it if I don’t have a turbo in car??

Reppiirezz
Автор

How many turns did you do on the blow off valve to get that nice sound ?

ricardovazquez
Автор

How long did the turbo last with this blow off valve? They are re-circ for a reason, mines was vented to atmosphere and didnt get 3000rpm before the eml was on and turbo blew on me, costing me a small fortune

nm-lzgt
Автор

I'm thinking of installing on on my Audi TT 1.8Q. Can I get the details of the Bov that you brought or is there any that you reccomend? Also is the installation as simple as the one on the Golf. I'd appreicate your reply. Many Thanks! :)

nadz
Автор

There are some special plyers for them VW hose clips... So much easier!

loganclough
Автор

Should the bit u put in the down facing pipe be installed in the pipe to the left hand side then ? Is there a video anywere showing the correct way to install this piece? Thanks.

KieranBartlett
Автор

i guess its fitted the other way around  try horizontal fitting for louder  wooosh

firassayah
Автор

i have one of these. the top 2 outlet are connected inside the valve = unfiltered air will be sucked by the turbo when off boost.
fitted the wrong way round like in this video means boost is immediately vented so you won't even have boost...

AF_PT
Автор

Explained it the best out all the videos I've seen for a vw

elmicandelaria
Автор

😳 8 MONTHS!!!
...they had to wait until kids 4th b'day
to make them before shipping!!! 😂

MrMaster
Автор

Still sounds like a sewing machine. lol ;)

DaytonCarCare
Автор

Hey man, nice video, thanx, i have a turbo setup in my car, thinking of adding a BOV, question is, will this affect my fuel economy? Thanx bro.

BABYGODZILLA
Автор

hello i have a car that probably doesnt have a recirculation valve (a 1991 peugeot 1.7 turbodiesel) how to install one on that? it also doesnt have a brake booster so no vacuumpump

yorrickwi
Автор

Thinking on putting one on my connect lol but unsure where to get the vacuum line from

handymanplasterer
Автор

Fitted wrong.. You want it dumping from the turbo boost pipe and cap off the lower hose that's attached to the intake from the air box..

iMann_iFail
visit shbcf.ru