mini audio amplifier using bc547 transistor

preview_player
Показать описание
mini audio amplifier using bc547 transistor
Рекомендации по теме
Комментарии
Автор

The reason the sound quality is bad is because the BC547 is a very bad choice for driving a speaker - it has a maximum current of only 100 mA, and the 1k base bias resistor is too low. This resistor should be chosen (maybe 33k - orange, orange, orange) to give the current that the BC547 is capable of handling, probably 50 mA. The BC547 should be replaced with a TIP41, which can handle more current. A power transistor such as the TIP41 needs a heatsink.

If the speaker has too much DC current through it, it will be damaged.

This person needs to watch a video on the proper way to solder. Those are poor solder joints.

acmefixer
Автор

I have seen a lot of videos and are great.
but have a question that i can't find anywhere.
can you make an intercom with 8 telephones?
because I can only find them with 2 phones :(.
like to hear from you.
thanks

Sailingyachtopensea
Автор

Tenho duas perguntas para você:
1-Não passa corrente direto para o alto falante?

2-Porque ao modo que o som fica rouco?

eslaelsonmartinsalves
Автор

don't go over 1watt or it will burn use 1 watt speaker

asadanwar
Автор

i increased the resistance and it was too loud😂

itsme_deiru
Автор

Transistor bohot heat hota hai iska koi solulion hai??

pabitramitra
Автор

I have try it with a BC547B transistor get's hot and get not loud sound do you know the problem?

Chrisexpanosexpanosexploring
Автор

What is the output of your battery
I tried it, didn't work

MartinChibuike-gh
Автор

Ty u have very useful and practical videos. Tickling our creation 😁😁. Keep it on.... 👍

aeriksh
Автор

Kafi video dekhi or ban bhi gaya pr yar utna clear sound nhi aata hai, bhot ki bekar aawaj aati hai atak atak ke

indiancreativemind
Автор

I think the speaker in your phone sounds louder than the amplifier you built! ☺

John_Smile
Автор

The battery which is rechargeable or not

HydroMaster_Gaming
Автор

0:08, please tell me what is the red device you have connected directly with the transistor

jatinbarthwal
Автор

i think capacitor is used here to isolate the phone's audio signal with speaker(audio amp)

xyzxyz-yb
Автор

Thank you so much 101 percent working and sound quality also best thanks 👍👍, ❤️❤️❤️❤️❤️🤗🤗🤗🤗

mamatarout
Автор

It worked, even mine one is making better sound❤

mathfinity
Автор

I have done.
But I get very little amount of output....
Which means I can hear only by keeping the speaker very close to my ears....🙁
What's the problem??

manojkiyan