Natural Gas BBQ Grill Gas Line Install

How to install a gas line for a natural gas BBQ. Barbecue gas line sizing, fittings, installation techniques, and quick disconnect operation.

𝗔𝗺𝗮𝘇𝗼𝗻 𝗔𝗳𝗳𝗶𝗹𝗶𝗮𝘁𝗲 𝗟𝗶𝗻𝗸𝘀

𝗦𝘂𝗽𝗽𝗼𝗿𝘁
Want to support my channel or give back? Help me improve on these DIY videos by making a financial contribution. All contributions no matter how small are greatly appreciated!
Thank you!

𝗖𝗼𝗻𝗻𝗲𝗰𝘁

Disclosure: Pros DIY is an Amazon Associate. We earn a small commission from qualifying purchases through our affiliate links at no additional cost to you.

[dwaynerenton]

Pipe has to be taped with 2 layers of approved tape or sleeved when in passes through a wall, and needs support on outside as the 90 degree elbow is a swing joint.

[alsterling]

I just watched to confirm the BBQ coupler hardware. But I watched the entire video, simply enjoying your well organized scripting that really covered all the important points... including the 'gloves vs sheet metal' reminder... :-)

[tdonithan]

Thank you for posting! I just needed to know how to reconnect the line from the grill to the gas line.

[ronaldfeaster]

This idea occurred to me the other day so I had to see if anyone had already done it. Thanks for showing. Now if I can only talk my wife into it, she is a walking no sometimes.

[jeffdurocher]

Exactly what I was looking for, for the final step on my black stone griddle.

[Jamie-pozk]

I'm a gas fitter and the only thing I would of done differently is put a pipe stand off bracket on the outside wall so the pipe is supported and cant be turned at the elbow in case someone bumps it into accidently, which is code in my local jurisdiction. Another minor thing is that you aren't supposed to trim the jacket of the CSST line so far back, only enough so that you can put the compression ring on. You shouldnt be able to see bare metal. Clean work otherwise 👍

[lukehershey]

Great video. I recommend changing the hyperlink for the reducing coupling to a galvanized version since it is subject to the elements in this project. Nobody wants rust :)

[hotsaucehimself]

Came for the gas line, stayed for the Canadian accent.

[rruizproductions]

Damn bro. Nasty cut. Nice work. I did practically the same for grill and smoker. No more having to deal with propane.

[Reist_ance]

4:20 .. as you put your hand in there .. I was screaming in my head .. watch out for the edges … hope your hand doing going okay! Thanks for the video.

[rogerwhiting]

Nice clean simple job with good explanation

[westvalley]

Wow tight space. Nice work Add on pipe dope for extra sealing!!

[kenwillis]

super video. even included links to parts. You are AWSOME!

[chupapi]

Very good video, I have a question, I am going to do a fire pit and a BBQ grill on my backyard and my question is, can the gas and electricity lines go together so as not to dig another ditch? And I will need two gas lines if I am going to make a fire pit and a BBQ grill or just need one gas pipe ? the fire fit and the BBQ will be separated from each other 25 feet

[kylerayk]

According to the local building inspector, galvanized pipe is acceptable for gas line use. In the late 1900's it was approved due to the improvements in galvanizing technology. Apparently, early galvanizing processes were prone to the zinc coating flaking off and plugging orifices, etc. but now it is no longer an issue.

[maxkiu]

Does it need any protection for outdoor gas pipe during winter extremely cold weather?

[adannash]

Great Video but you missed out one step Gas-fitter that i know (Elk Island Gasfitting) told me it's very important to Clean the pipe with Oil and steel wool or abrasive pad before painting it -- otherwise if you paint over any small rust that has formulated on the pipe the direction of the rust will head towards the innards of the pipe (centre) like hot chilli's burning a hole through your stomach then we got a real leakage problem.

[aaronlowe]

Where is your regulator in this setup? I’m curious because I did a propane to nat. Gas conversion and I’m wondering if I need to re-plumb to buy a regulator before my valve

[PROSDIY]

𝗔𝗺𝗮𝘇𝗼𝗻 𝗔𝗳𝗳𝗶𝗹𝗶𝗮𝘁𝗲 𝗟𝗶𝗻𝗸𝘀

Disclosure: Pros DIY is an Amazon Associate. We earn a small commission from qualifying purchases through our affiliate links at no additional cost to you.

[vancekanegaming]

You did good but a few things, going to a exterior wall you should use galv pipe, last thing you want is the pipe to rust from the elements. And last you shouldnt use teflon on gas pipe, teflon dope only bc the tape can dislodge from the threads and can travel down the lines and cause a blockage. But good job and nice and clean.