How to make a Gesture Control Robot Car Using Two HC 05 Bluetooth Modules And Arduino | Robot Lk

🔰Hi Friends,

In this tutorial we will learn how to make a Gesture Control Robot Car. Using Two HC 05 Bluetooth Modules And Arduino. This is also an Arduino project that will impress others. This robot car is controlled by the accelerometer control transmitter. The transmitter consists of an MPU6050 sensor, an Arduino board, and a Bluetooth module configured as the master. This can control a distance between fifteen and twenty meters.
The connection between the Gesture Control Robot Car and the transmitter is through Bluetooth. The two HC-05 Bluetooth modules I use are configured as master and slave. The important sensor used by the transmitter is the MPU6050. It consists of 3-axis Gyroscope, 3-axis Accelerometer. All parts of the transmitter are assembled by me on an 2 Cell 18650 battery holder. The slave Bluetooth module was used for the robot car and the master Bluetooth module was used for the transmitter.

⭕Below are the links to purchase the required accessories

🔰AliExpress Links,

🔰banggood Links,
7). 18650 3.7V four batteries -
8). Two 18650 2-cell battery holders -
9). DC Power Switch -

🔰Amazon Links,

🔰If you find my creations valuable, interesting, and informative, please consider subscribing to my channel, liking and commenting on my videos, and sharing them with your friends.

🔰Thank You Very Much Guys, Good Luck!

DISCLAIMER: Some of the above links may be affiliate links, meaning if you purchase a product via these links I may receive a small commission/reward, at no additional charge to you.

--------

#gesture
#arduino
#robotlk

[mansuefbhyan]

Thank you for this i successfully completed my university project through this video thank you man

[crazysaptak]

Can we use Arduino uno instead of arduino Nano ??

[rajatakhileshchouksey]

nice explanaton + nice quality cam bro

[wrugvedvdeshmukh]

Sir mpu6050 library ka konsa version hai ?

[zindycangaming]

Bro how many of male to male, female to female, male to female jumper wires do I need?

Btw, I like your clear explanations and everything. I also subscribed.

[IMMORTALxH]

Hello Sir, I have created the transmittor and its giving the perfect output in the Serial Monitor. But, in the reciever when I upload the code, the code succesfully uploads but there is nothing in the Serial Monitor.

Please Guide me with this

[prajwalmirajkar]

Tq so much bro and one more doubt
When we are uploading progress for transmitter ist showing error whether we need to assemble all the components then have to upload the program or what

[LEADERBOOYAH]

LN29 the lamp not on what is the solution

[g.l.g.]

why are all my wheels moving at this time 7:46

[tveee]

When receiver code is executed in serial monitor its just showing boxes not like stop, left etc...

[RidaFatima-lgrw]

Why my onle two wheels are moving I have checked all the connections and everything

[mrjayhacker]

what to do if the wire you are using to connet the battery to the l298 motor is burning

[illshotzfn]

Hey, I have done everything as shown and it works great, but i have one big issue, whenever i make it go forward 3 of the wheels work fine but the bottom left wheel spins in the opposite directions, Im in middle of my project right now if someone can help that would be great

[IgnatiousVicky]

My doubt before making transmitter when I switch on oneside wheel is spinning why someone reply please

[TMG_YT]

How can I make it rechargable with a charger?

[atulshiradkar]

receiver code of the Gesture Control Robot Car First time code is working but second time not working

[SiddharthMaurya-jo]

hello i am ending part of this project and when i put transmiter code in nano the code is uplode but my sreial is showing something it show something like this plz solve this problem....
Initializing I2C devices...
Testing device connections...
MPU6050 connection successful
Initializing DMP...
Enabling DMP...
Enabling interrupt detection (Arduino external interrupt 0)...
DMP ready! Waiting for first interrupt...

[lovelybaby]

Bro i need this kit so tell me how much i will pay bro

[pratikguptaff]

I am in 8 class can you help me or made new video

[designdescent]

Bro for me the code was not uploading bro what is the problem