How to Install a Magnetic Switch for LED Lighting in Cabinets and Drawers | Inspired LED

Inspired LED's magnetic switch allows you to turn your lights on and off simply by opening and closing your cabinet doors. Perfect for in-cabinet areas that need a bit of illumination, such as pantries, silverware drawers, and under sinks.

Contact us with any additional questions!
Phone: [phone]

[Pablo]

This is exactly what I have been looking for, for my tool box thanks a lot man!
Great video!

[loriearte]

I'm a beginner so this is very helpful. Thank you.

[davediaz]

Finaly a short but excellemt explanation

[MonaichFother]

So in this setup a transformer would be permanently on to supply the correct voltage to the leds? Not great/

[thejuliochannel]

What do you call that terminal block that is connected to the magnetic reed switch?

[qazzaq]

what power spec. you suggest for 5m led strip.

[markreynolds]

Where do I find the single in-cabinet bulb used in the demo?

[mycats]

What sort of power/wire is needed to connect to the first lead that brings power to the switch?
I want to have a configuration where I add a wall switch after a GFI outlet to power a vanity light. After connecting to the vanity light, I want to have a light inside a recessed medicine cabinet that only turns on when the door is open (if the wall switch is on). I believe the vanity light needs something like 14/3 wire or 12/3.

[brandonmiller]

Can it be wired in the normally open position?

[ProjectRecon]

If running off a power pack would having the led controller on but the lights off drain the batteries quick? Thinking of using this for a portable tool cart

[ELBSpeaking]

Is there a way for this to be done in reverse, I mean, turn the lights on when the magnets are together? I need this for a helmet I am creating and I need the lights on when the helmet is put in place. Thanks in advance.

[troydry]

What do I do if I need more amps then what the switch can handle

[MatthewIbarra]

This is so cool! Could you do an example of a three way magnetic switch, i.e. two magnetic switches being able to control the same led light source.

[vickikgibson]

Hey, this is what I am looking for, as I want to build a game for the nature centre. I need to place an 8x10 x1/2 inch info pad into a cutout square..but I only want the right answer to LIGHT UP, not shut off, which I hope is possible? (the led light will go back to the right answer info block) ...is there a more flat magnet set up I could use for this purpose? Also, what plugin do I use and that centerpiece please, I will need to get those!:) We need a plug-in so it works longer for the kids, but we also could use a battery for each light set up. I need to set up 4 lights, so is there a 4 way splitter I could use, but still only have one light on at a time, or all lights when all are correct answers? Or do I use an individual pack for each light? Thank you!

[AZTEC_ARTS]

Power supply / source plugged into wall outlet ?

[renyeliyap]

Can this switch wired to work the other way around? Turns on when the door is closed??

[peterwaterton]

Can you actually revers what you have demonstrated.
Example - turn power or light off when opening the door?
This is for a number plate light that comes on when lights are turned on but if a trundle tray under the Ute tray is opened the light obviously turns off.
Reason being the trundle tray under the Ute is as long as the Ute tray length.
There is no way wires can be not be in the way and therefore be tangled up when closed.
Hence a more convenient way of lighting number plate.
I’m assuming reversing wires polarity?
Thank you in advance.

[TheNekry]

I have the same magnet switch but power-ON when they are close to each other. How to change power-ON when they are apart?

[ButchOC]

I need that magnetic switch with the middle adapter where can i find it

[VenomXCV]

Hi, how would this circuit work of I was to install an on/off switch? Looking to do a DIY lightsabers hilt but wanting to create a set up with allows me to remove the chassis and when the chassis is re-installed I don't need to connect wires back u because of the magnetic contact and still only be powered up by the on/off switch, any help would be greatly appreciated.