Getting Started with Rhino Part 4 - Creating an EXTERIOR MODEL!

In this video, we continue our series on modeling in Rhino by creating a model of the exterior of a building! Learn things like cutting openings, adding doors and windows, working with angled walls, and more!

FULL GETTING STARTED WITH RHINO PLAYLIST

Disclaimers: All opinions are my own, sponsors are acknowledged. Product Links in the description are typically affiliate links that let you help support the channel at no extra cost.

The Rhinoceros name, logo, brand, and other trademarks or images featured or referred to on my YouTube channel are the sole property of Robert McNeel & Associates. Neither I nor this YouTube channel is affiliated with, endorsed by, or sponsored by Robert McNeel & Associates any of their affiliates.

TIMESTAMPS
0:00 - Introduction
0:25 - Modeling Building Footprint
1:57 - Extruding Walls to 3D
2:49 - Adding a slope to walls
5:16 - Duplicating Sloped Walls
5:45 - Adding front wall to model
6:45 - Merging walls into single object
8:25 - Roughing out openings for doors
11:00 - Roughing out window openings
12:14 - Adding slope to top windows
14:14 - Cutting openings for windows
15:45 - Alternative opening cutting option - Push Pull
16:45 - Creating windows
19:53 - Modeling Door and Frame
21:56 - Modeling large window with mullions
23:55 - Modeling our garage door
24:45 - Adding a chamfer to garage door parts
26:00 - Creating our sloped roof

[TheRhinoEssentials]

Hi everyone! Let me know if you have any questions about this workflow in the comments below! :)

[tigerlilyshouseoffish]

You are the BEST Rhino on the youtube!!

[markgildenhaar]

Thank you Justin for your amazing tutorials. I've been referring to your SketchUp tutorials for years... very helpful!
I'm helping my daughter to learn Rhino and we're working through this tutorial set. Knowing SketchUp is helpful, however the command-based approach in Rhino takes some getting used to.
Where does one find a list of all the commands (like "wire cut" and "push-pull") ? Are there tool icons for these (like SketchUp) or a drop down menu for them?

[paulmacphail]

Hi Justin. Im having difficulty with selecting a curve or line that is on a plane. When I click I get a dialogue box forcing me to make a choice between a curve and a polysurface. Unlike Sketchup which seems to know whether you want the line or the surface by proximity, the Rhino approach seem to be disruptive to the normal workflow. Maybe Im not using filters correctly? However when I filter for curves it selects all of the curves on the project. Could you advise?

[anaguerrero]

How do you set up the angle?, I tried setting up a point in the corner and open the “<“ then put 14” after that I don’t know what to do