Free CCNA | Configuring OSPF (3) | Day 28 Lab | CCNA 200-301 Complete Course

In this lab for day 28 of my free CCNA 200-31 complete course, you will practice configuring and troubleshooting OSPF, including OSPF network types, OSPF hello/dead timers, and serial connections.

In this FREE and COMPLETE CCNA 200-301 course you will find lecture videos covering all topics in Cisco official exam topics list, end-of-video quizzes to test your knowledge, flashcards to review, and practice labs to get hands-on experience.
SUPPORT MY CHANNEL

The best way to support my channel is to like, comment, subscribe, and share my videos to help spread the word!
If you can spare to leave a tip, here are some options:

======================
======================
Cryptocurrency Addresses

Bitcoin: bc1qxjpza7nx46e8a2rtz6vkcrvxx9mfjnufdrk0jv
Ethereum: 0x08B4325b1B99B05d850A3bfCd4A6620D770cfB64
======================

0:00 Introduction
1:38 Step 1
6:12 Step 2
8:38 Step 3
10:40 Step 4
12:35 Step 5
13:27 Boson NetSim

#cisco #CCNA

[wasseemal-shami]

listened to "Welcome to Jeremey's IT Lab" 53 times hitting like for each and every video in this course, with some of them start with "Welcome to my complete CCNA ..." :) appreciate your effort.

[davidhendree]

For the past hour I’ve been frustrated wondering why I couldn’t get R1 to establish connectivity to the rest of the routers outside R2. I was puzzled because there can only be a DR, BDR, &DROTHER for the interfaces OSPF state. Then randomly it clicked... I had to make R1 & R2 connection a P2P. This journey has been so humbling. Extreamly grateful for you Jeremy, I aspire to be like you one day.

[ranjanadissanayaka]

Ahh... I've finally completed ospf videos. Yayy!!! Now I have ospf skill. Thanks so much for your time Jeremy.

[countertop]

After watching your videos i finally figured out how to connect my home router by serial and set the clock rate at 128000.

I can finally watch your videos at home in stunning 144p without having to go to the library.
It's amazing, the buffering only takes around 1 hour aswell!

Kind of cisco to keep serial alive still in courses and labs, but really it has no practical use at all in today's networks.

[Cory_]

Figured out steps 2, 3, and 4 without watching the video. 3 was tricky, but I took good enough notes. Feels good.

[konefine]

Thank you master Jeremy, best tutor ever. At last, OSPF is no more an headache for me !👏👏👏✔

[glenntembo]

Thanks J, your labs and clarity of work is never in vain. Much appreciated for the types

[-bljq]

Another very good video, this lab is more complicated than previous due to ospf trouble shooting, but many thanks to Jeremy, you made it very clear.

[datedatekyal]

Thanks you, Jeremy. When I learn the networking before, I don't understand in ospf because it is complicated. Now I understand the ospf, because you divide the whole complicated ospf staff into sections. Each section is easy to understand and with associated labs. Waiting for new videos 😊

[Redline_Kouki]

Jeremy, Thank you so much for all you do. I will say you are likely the soul reason I will be passing my CCNA. THANK YOU SO MUCH!!!

[rdsec]

Fun part of troubleshooting labs: I try it myself, figure some things out, adjust some configs, then unintentionally create some problems of my own. Then, in the process of fixing THOSE problems, that's where the real learning happens. Thank you for all the awesome content Jeremy! Excited to continue with the course and get ready for the exam.

[ferk]

I really appreciate your time and your patience besides your support with those very handy videos, thank you a lot Jeremy! Greetings from México 🇲🇽

[lewismcdaniels]

Really enjoyed this lab! Made some mistakes along the way but figuring them out allowed me to understand OSPF better.

[chrispark]

Hi jeremy, I finally managed to finish all your videos (Excluding IPv6) I've learnt so much from this course. I will do a quick review on another udemy course + odem book and start hitting boson exam! After all that, i will take my ccna test! I couldnt thank you enough for this amazing course.. I will give back in the near future :D thanks jeremy!

[Reason_over_Dogma]

Thanks again for these videos. I used the show command | section ospf from the lecture to see what was on the running config to troubleshoot. I totally forgot about the sh ip ospf int command. I need to remember that command.

[henryNovateur]

Hi Jeremy, I'm having some trouble with this particular lab.

For some odd reason R1 got the route to 10.0.2.0/24, and other OSPF routes, but the other routers refuses to get the route to 10.0.1.0/24 making it impossible for both PC1 and PC2 to ping each other. I even tried following this video step by step to see what I missed but it still didn't work.

And as always thank you very much for making these videos and labs its super helpful! Hopefully I'll be able to pass my CCNA later this year.

[rotrose]

Legend, Thank you for each tutorial that make me like networking day by day.

[preezybeats]

i'm going to pass because of these videos it's so sweet thanks so much Jeremy i will send you a cisco switch for christmas most definitely

[janrenzrosales]

As usual, awesome content Jeremy! Thank you so much. Just wondering if after this CCNA will you also create for CCNP ENCOR/ENARSI? Would definitely buy that course of yours if you’ve decided to put it on sale.

[somethingnew]

In 2 weeks I have the ccna exam. please explain some parts of DNA center and WLC&APs. Thanks for all videos you ulploaded!