filmov
tv
Prestigio Wize Y3 PSP3406DUO PSP3406 DUO recovery, wipe cache, update adb sd, factory reset.
![preview_player](https://i.ytimg.com/vi/G0gKJmDMkow/maxresdefault.jpg)
Показать описание
How to enter RECOVERY on Prestigio Wize Y3 PSP3406DUO PSP3406 DUO.
Read below:
English
RECOVERY =
0. Poweroff.
1. Hold the volume button up + power button
2. And hold until the logo appears and increases the brightness.
3. Then let go.
4. A dead android will appear with the message "no command".
5. Then press successively pwr and immediately vol +, for about 0.5 seconds
6. and then release first vol +, and then immediately pwr.
...
Then there will be a standard recovery with wipe cache and update from ADB.
points 5 and 6 may not work the first time - try again.
The main thing is the correct sequence and the correct delay.
pwr down, vol+ down, vol+ release, pwr release.
==================================
Russian
РЕКАВЕРИ =
0. Poweroff.
1. Зажать кнопу громкости вверх + кнопку питания
2. И держать пока не появится и не увеличит яркость лого.
3. Потом отпустить.
4. Появится дохлый андроид с сообщением "нет комманды" / "no command".
5. Затем нажать последовательно pwr и сразу vol+, на примерно 0.5 секунды
6. и потом отпустить сначала vol+, а затем сразу pwr.
.
Тогда появится стандартное рекавери с wipe cache и update from ADB.
пункты 5 и 6 могут получиться не с первого раза - пытайтесь.
Главное правильная последовательность и правильная задержка.
pwr зажать, vol+ зажать, vol+ отпустить, pwr отпустить.
Read below:
English
RECOVERY =
0. Poweroff.
1. Hold the volume button up + power button
2. And hold until the logo appears and increases the brightness.
3. Then let go.
4. A dead android will appear with the message "no command".
5. Then press successively pwr and immediately vol +, for about 0.5 seconds
6. and then release first vol +, and then immediately pwr.
...
Then there will be a standard recovery with wipe cache and update from ADB.
points 5 and 6 may not work the first time - try again.
The main thing is the correct sequence and the correct delay.
pwr down, vol+ down, vol+ release, pwr release.
==================================
Russian
РЕКАВЕРИ =
0. Poweroff.
1. Зажать кнопу громкости вверх + кнопку питания
2. И держать пока не появится и не увеличит яркость лого.
3. Потом отпустить.
4. Появится дохлый андроид с сообщением "нет комманды" / "no command".
5. Затем нажать последовательно pwr и сразу vol+, на примерно 0.5 секунды
6. и потом отпустить сначала vol+, а затем сразу pwr.
.
Тогда появится стандартное рекавери с wipe cache и update from ADB.
пункты 5 и 6 могут получиться не с первого раза - пытайтесь.
Главное правильная последовательность и правильная задержка.
pwr зажать, vol+ зажать, vol+ отпустить, pwr отпустить.