04. Installation of Fibo's visible two piece internal corner profile

See how to install Fibo's two part internal corner profile when using a visible corner profile to finish.

Place the inner part of the corner profile over the base profile.
- Attach the profile with screws into the pre-drilled holes.
- Clean cut the first panel against the corner profile.
- Adjust the length of the panel to the ceiling.
- Clean the cut edges.
- Apply Fibo Seal.
- Lubricate with Fibo sealing tool.
- All cut edges should be sealed.
- It is important that the first panel is plumb. The panels are installed from left to right.
- Clean with Fibo Clean.
- Seal with Fibo Seal.
- Install the visible part of the corner profile. Using the Fibo Tapping Tool, gently tap it into place.
- The sealant should be pushed out the entire length of the corner profile.
- Fibo clean is sprayed on excess sealant and removed with Fibo’s Sealing Tool.
- Clean with Fibo Wipes for best result.