How To Wire LED Strip Lights

Today we’re going to explain and demonstrate how to wire a Wireless RGBW 4 Channel LED Controller with Channel Pairing. This product is designed to be easy to install, mount, and configure, making it installer-friendly. It features an easy-to-use remote control, 0-100% brightness control, and full color (16.7M colors) control. The LED controller is compatible with all of aspectLED's single color, dynamic white, RGB, and RGBW LED fixtures. The receiver and controller units do not come paired, but the pairing process is straightforward.
________________________________
Time Codes:
0:00 - Introduction
0:22 - What You Need
1:18 - Installing Strip Lights
1:51 - Wiring The Power Supply
2:59 - Wiring Strip Lights
4:10 - Pairing The Remote
5:00 - Thanks For Watching!
________________________________
Check out some other videos on strip lights:

Follow us!

[burtontrent]

Thanks for this video I am just adding Smart Wiring to my 12 metre bus so this was really helpful. Burton Trent

[Bionicleforever]

is there a video on doing parallel lighting, I want to do it to light up each shelf seperately. thanks!

[jannayoung]

Can you connect directly to a light switch?

[Valentinesilvas]

How do you separate the zones? say I have a zone in the living room, zone for my TV, Zone for a book shelf and last for the kitchen? How does that work and what's the MAX ft I can run this LED..

[fernandolomeli]

What kind of power I need for 115sf of light color

[JojoUniversalis]

3:50 hi thanks for your video, I have both RGB LED lights and single colored LED lights. For the RGB LED's this was really helpful but I don't know what I have to do with the single colored LED's. I think I have to connect the red wire to the positive supply, but what do i have to do with the black wire? Thank you already 👍🙏

[JoseRamirez-rf]

Do you need a reciver if you are wiring only white leds ?? Or can I go straight from the power supply to the led strip ? Thank you

[koryabel]

I have 4 tape lights in total, can I put all 4 on one set of terminals, I see there is a second set of terminals on the power supply end and the tape light terminals end so should I put 2 tape lights on one set of terminals and the other 2 tape lights on the second set of terminals?

[TintProsMobile]

GREAT VIDEO.. what if i have multiple led strips, do i have to get multiple power box?

[kai]

can you show us how to splice the strip to add X amount of wire and then continue the strip further. For instances where you dont want the lights at a corner like a foot or so or longer and then continue the light down.

[woof]

what if you were doing 4 shelves in one display case ?

[MightyBenihana]

I didn't see any mention of the AWG used for the wires. That would have been useful.

[nwbudro]

That's a honking huge power supply.

[BennyTocamelo-bz]

My strip only has black - and white+ so what should i do?

[nathankoury]

For single color he says use the red in the positive but on the website it says use black. This is confusing.

[mattlloyd]

can you power multiple controllers from the same power supply? would this be done in parallel... (you could take the controller link out)

[everymanisyourteacher]

How come no one seem to make a video without the remote control thingy? Some ppl are above 18 and don't need any tecno colours in their rooms.😊