Everything you could ever wish for? Testing the new 12V Parkside Performance tools and MORE!

Video timeline
Introduction - 00:00
Battery & Impact wrench testing - 00:40
Hammer Drill - 02:54
SDS Hammer drill - 09:31
Impact driver - 15:25
76mm grinder - 18:30
Thoughts on tools, batteries, chargers - 23:22

I hope you enjoy the video and you give the video a like, subscribe to the channel and leave a comment. I try to reply to as many comments as possible! Let me know what you think of the new tools! Are you planning on purchasing any of them?

Tools in the video and the prices I paid for them.

[PetyrWo]

DUDE! YOU ARE A F****ING LEGEND! Everything in one video! All other youtbers will make 10 fideos from these tools and post one by one to try and get more views. You are just a GIGA CHAD all in one and the best quality Parkside content ANYWHERE! You deserve A MILIION VUEWS FOR THIS and I hope you get them. I want to know how long this video took to make and thank you for every second!!!???

[DriverWay]

I enjoyed every minute on the video, especially the part of the cut off tool.
All new 12v Performance lineup of Parkside seems to be really good tols.
Thumbs up!

[Ajdpogodi]

I got 12v Impact Wrench, and first one was unbalanced, it vibrated so much plus uncenterd head. Then I replaced it and the new one was good, only there is a metal sound when I start/stop with the key on it.

I would also buy 12v Performance grinder, but already have excellent Bosch one, 12v brushless as well:-)

I have already 12v Drill, but also when first one arrived, clutch was noicy and bad, so I replaced it and the second one is perfect. But the thing is that quality control is really not so perfect with these tools, unfortunatelly.

Wow, amazing… it is very good because everything is in one video. Thank you very much. YOU ARE THE BEST. 🎉 🎉🎉

[JasaDavid]

The SDS drill frankly looks like it should have been a green line, especially when you look up it's teardown and you see that unlike it's 20V sister, it doesn't have a metal housing for the gearing and hammer mechanism, so it's unsuitable for lengthy work, unlike the 20V cordless hammer.

And big thanks for the comparison of these two in a good concrete. I was thinking of leaving old 5J PBH 1500 at one site and getting some cheap cordless one to have at my apartment but now it seems that the only cost-effective thing to buy would be the 3J corded green PBH 1050 (if Lidl sells it ever again) or rhe current 5J hammer, the PBH 1550.

[raresvintea]

How much the bit jiggle inside the pbspa 12v hammer one, wiggle? I have the old version c3 and the bit wiggle a lot

If they will be sold in RO i would buy the impact driver and the cutoff wheel, very nice tools.

[orlovszki]

I have 6 different 20V performance tools and still, in most cases i reach for the green 12 v counterparts. Now i have to switch to black. 😢

[dronestuff]

I have the impact wrench, you should test if the new impact driver is more powerful than the wrench or same.

[beli]

A 12V 1/2" impact wrench (40€) is great for me with a 4Ah battery. It's so small and light. Up to M12 it good enough. For larger screws, I will use pneumatic impact, but this is so small and short that you can reach almost all screws on car suspension. It is my go-to tool for the car. But, most people buy it for wheel screws. It can unscrew it if it's not overtightened, but wheel screws are easy to access with a bigger impact wrench or with a longer breaker bar.

Can you do a 12V impact wrench with a "1/2 to hex bit adapter" vs. a 12v impact driver?

[indiavandoornen]

Unfortunately the Impact Wrench is not sold in the Netherlands, and Lidl Belgium does not ship to the Netherlands

[mondbasis-alpha]

12V Parkside Performance Jig Saw: You have tested also?

[jonathanlarsen]

Happens once in a blue moon that someone uploads a video like this. Absolute King.

[Alex.P_]

I was eyeing the SDS drill this week. I wanted it for the hammer only function, mainly to remove mortar from brick and brick drilling. I think I'm sold on it 😂

[TheTrueArix]

Great Video as always bro. I got the new Drilldriver and a second Impact wrench aswell as the new 5.0Ah and 2.5Ah batteries. The drill is amazing and the impact wrench does like the 5Ah battery but its only for smaller bolts, especially when they are rusty. I still need to get the grinder and your video helped me with my decision 😂 I hope they will make an impact wrench similair to the new millwauke 12V, maybe not 700Nm but somewhere around 500Nm would be nice. As always nice video 👍🏻

[mictreful]

Live here in the USA I wish LYDL would sell a better selection I have a couple of their tools they are pretty decent and work very well missing the boat on the newer brushless tools

[grzegorzwitek]

Measuring noise on impact without screw is bad idea. It makes noise when using. A lot of noise.

[ergysgega]

I was waiting a video like this to buy the grinder, thanks to putting all of this machines in one vide

[ibmezouar]

Finally! I've been waiting for your review of these tools and it didn't disappoint! Thank you sir!
I already bought all of these, even though I already have a lot of their green equivalent and didn't really need these, but I'm an addict haha

[edfort]

So happy to see the 12v system progressing.

Note for future videos: if you can help it, please stop getting the drill bits to the point of smoking, or your drilling tests will be less reliable and trustworthy if you use the same drill bits over and over.
Just drill slower and speed up the drilling footage while adding a time counter, to avoid the drill bit smoking and not have the video too long.

[BuddhaRhino]

I just moved to the netherlands and seeing power tools in the supermarket at that price truley shocked me. I just ordered the new parkside orbital sander from lidil and its amazing. I understand its not the best quality but for that price tag you cant loose. I am interested though, what counties does parkside supply to? Never heard of them untill i moved