How to Create a Multi Color Screen Print using the xTool Screen Printer

Subscribe to my channel:

WATCH THIS VIDEO FIRST:

If you'd like to buy any of the items shown in this tutorial, check out the links below. Some links are affiliate links. By clicking on these links I may earn a small commission at no cost to you. Some products may have been provided to me by vendors, however, all opinions and reviews are strictly my own.

Shop Here for All Products:

*use code KARLEY

*Disclaimers

Some links above are affiliate links. By clicking on these links I may earn a small commission at no cost to you. Some products may have been provided to me by vendors, however, all opinions and reviews are strictly my own.

Karley Hall will not be liable to You or anyone else for any decision made or action taken in reliance on the information given by this video or for any consequential, special or similar damages, even if advised of the possibility of such damages.

[jackulrich]

Just a few tips. I’ve screen printed for a few years. You don’t clean the screen between shirts. I would only make one pass with the squeegee, not two, unless you see a problem. Don’t press too hard, keep an angle to the squeegee, too vertical and it doesn’t screen well. Lastly, keep the image smaller than your widest squeegee. It only causes problems to do multiple passes. Also, white ink is a pain. It is thicker than any other ink. Some brands are better than others when it cones to consistency.

[HopeDesigns]

I appreciate that you share your learning process. Too many only share immediate success. I'm learning to use mine, too. White gave me challenges too.

[MsMymiracle]

Good JOB! I've been wanting to try this. Thanks for showing everything. 🙂

[KeonWarner]

Great video u ain't hiding nothing thank u

[JEBULLC]

Karley, beautiful video.Actually, just bought my own XTool this morning, can't wait to have it. But washing your video gives me a great tutorial and things to watch out for once I get started. Thank you..

[dccc]

No.1 good work…where to get more coated screens so u can do more images where to order them

[starbrown]

I love your design. You did an amazing job, considering how long this process takes. I think the seams in a t-shirt are an issue no matter what type of process you may use.

[cliffart]

so how have you improved over the last 7 months. what was your learning curve? I haven't screen printed since high school - a very long time ago - but will be getting my xtool screen print kit this week. I currently do dye sublimation of poly and 50/50 shirts, but am looking forward to being able to print on dark shirts.

[borealwild]

Is your speed ball ink also water based? Thanks for the video, I have been nervous to try mine! Great tutorial

[crashgtr]

Thanks for doing this video! I would be interested in knowing if you need to wash the screen between each application and which ink will last longer in the wash?

[whatausee]

Cool video. I'd suggest looking into "flooding" your screens between prints. You don't want any ink (water based or not) drying in the mesh as it will clog the individual squares/pores that make up the messhx and distort your image. There are lots of YT videos showing methods for different comfortability/experience levels ie: push vs pull methods for screening, types of inks + curing method/time, registration marks to allign designs and flooding/amount of passes per design.

[KerryMelfi]

Mornin' :) I have an M1, so it looks like I won't be doing any screen prints anytime soon. I have done a five color HTV shirt where I used registration marks in the upper corners to line up each color. Having zero experience with screens, would it be possible to add a circle at the top center of your design so you can see through the screen, then place a round sticker on the shirt in a corresponding place? That way you're lined up, and the ink in the circle goes onto the sticker which you peel off when you're done. Would that work?

[Wpfantastic]

Question! You would have to buy new coated screens for each design? And if so, how much are the screens?

[moonpuppy]

QUESTION:: When you take the screens out of the frames to do more projects how do you get the multi-colored screens back in the frames all aligned for more multi-colored screenprinting? Can you do this?

[MsMymiracle]

Also, we are our own worst critics. Keep that in mind while you're learning. I find microscopic mistakes in my work and people love it...

[SyntheticStuntMan]

x-tool advertises this as the fastest way to screen print. this is not true. I love this equipment, it looks well built and being able to laser your screens is pretty cool...but 1 to 3 hours to make a screen? ridiculous. this can be done many times faster using a vinyl cutter.

[BruinBearDoc]

They REFUSE to support their screen printing XTool use with D1 and will NOT sell extra screens and materials! TOTAL scam!