How to make a copper tube coils

In this video, I'll try to show you how I make a copper tube coils for my steampunk lamps. Respond to requests from subscribers.

Social Media:

First song used: KISNOU X Silencyde - Awakening

Second song used: Anima - You Are Truth

[BanjoShow]

The pipe what I use in my projects in most cases of 1/4, If you want to use a larger diameter pipe, you must understand that you will not be able to make a small diameter coil. Pipe pieces what I used in the video: 3, 2, 11/2, 11/4. All bends of the coil I make with help of a piece of pipe because without help of a tube the coil breaks down. To unwind the coil you need a flat surface, hold it with one hand and untwist the other. If, during the stretching of the coil, it is stretched out crookedly, just put it on the pipe and squeeze it to make it stand in its original position. I'd love to tell you everything in the video, but I do not speak English, So forgive me.

[theropod]

To bend larger diameter tube, and or with stiffer walled copper, find some very fine and very dry sand and fill the tube first. Plug both ends securely before filling. Slowly bend the tube around the form. The sand will prohibit kinking. When done simply pour out the sand.

[markussgrietens]

You have saved my life brother! I needed this for my distiller, thank you

[sitgesvillaapartmentneilsc]

It works well as its brand new copper for heating pipes so its not aged hardened and its designed to be bent, give it 6 months in the air and it would be be able to be bent like that without annealing first, New copper pipe is great to work with.

[vanhalenman]

i used this technique to make a subcooler for recovering refrigerant faster. thanks my dude

[alzeNL]

thank you ! I'm making a "Super J Pole" and no one shows how to actually wind the copper pipe required for the colinear radiator, this is really helpful.

[chrisspreacherman]

Thanks for your works!! Most people would not show their love of works in such details! ❤️❤️💖💖😀😀😀 Now I can create most of the stuff I always wanted to for projects like this.

[sarisx]

THANK YOU!! Now I can make my own- thank for your Love :)  To show us all!

[brainstorm]

Good one, You make it looks so easy 😂😂

[Unclesmokey]

"Steampunk my still just got a new reference!!! nice that you don't fill with sand or anything.

[chrism]

I'm building a fast soup/sauce cooler to help with food safety. This is going to help, thanks!

[fartwrangler]

How do you keep the tubing from collapsing?
I've made home-brewing gear from 1/4" copper tubing, and I wasted over 100' of tubing trying to get it right. Coiling empty tubing, always the tube flattened out, at least partly. Since I was going to be running fluid through the coiled tube, this was unacceptable.

What I finally had to do was fill the tube with fine sand and solder ends on it, THEN it would coli without collapsing. Then cut the tube, drain the sand, and blow out any stubborn grit with compressed CO2.

[alokbandhopadhya]

Than sir me to doings same types
No water or sand fill up but how to calculate lanth s turn no
Please inform us

[bobbysingh]

Will I be coil 12mm dia pipe into 5cm diameter. Please reply its for my project?

[ecofriendly]

How to add terminals, heating element also magnesium oxide powder?

[mediocreyoutuber]

I know this probably won't ever be seen, but I am trying to make something with my dad and I was just wondering if you think this would work with a slightly larger diameter tube or if it'd collapse and break down. Thanks in advance if anyone sees this.

[empress]

Thank you very much. What's the name of the tool to cut copper?

[papajikiaryuvedikdwaiya]

Kyaa 3/8 ki mil jayegi aggar ho to price bataye v photo dikhaye

[markissboi]

Copper spiderweb 🕸 i found some copper wire in plastic conduits off cuts 3ft 1/8 thick wires inside - also had a few old transformers about 🚶‍♂️
then my mind clicked 1 week latter then made an aluminium spider and hung it in the toilet My mate said thats different never seen it done 🙃

[brucebostiler]

Is it possible to make a deep fridge condenser out of 1/4 inch copper tubing ?