Camper Package Install Guide 2017 | TopperLift | Step by Step | Truck Bed Camper Tent

This is a video explaining the installation of TopperEZLift Camper Packages. Hope You Enjoy!

The TopperEZLift is a self-install topper lifting system. This all electric system is powered directly from your vehicle's 12 volt battery. Which means no messy fluids or air to worry about. While holding the safety switch select up or down on the control box. Operation is that easy! The linear actuators are capable of lifting around 900 lbs combined with a lifting height of approximately 17.5 inches and seals firmly back down onto your truck bed. No more headaches from removing your topper for those larger loads and no more crawling on your hands and knees to reach your cargo. Simply lift the topper up to solve your problems. Add the camper package and you have an easy home on the road in just seconds! Don't miss out on the exciting benefits of owning the innovative TopperEZLift.

Overland
Truck Shell
Truck Cap
Truck Lid
TopperEZLift
TopperLift
Truck Bed Tent
Truck Bed Camper
Truck Tent
Truck Camper
Truck Topper
Power Truck Topper
Automatic Truck Topper
Automated Truck Topper
Raising Truck Topper
Power Raising Truck Topper

ATV Trailer
Snowmobile Trailer

For Sale in:
Minnesota
Wisconsin
Montana
North Dakota
South Dakota
Colorado
Washington
Wyoming
Oregon
Nebraska
California
New York
Texas
Nevada
Florida
Alabama
Louisiana
Maine
Massachusetts
Missouri

[sherryhawk]

You need about 8 inches of material on the lower sides, a flap, to keep rain out from soaking the velcro and leaking. :)

[patrickjones]

I really like this but can’t figure out why a apron wasn’t incorporated onto the outside bottom edge along the front and sides to overlap the bed sides and keep out rain. Yeah, yeah, I know. “Our extensive testing shows that the use of hook and loop tape yadayadayada...” does not give me any more confidence when I’m in the middle of nowhere in a rainstorm and water leaking in the bottom edges of the walls. Yadayadayada becomes irrelevant.

[photogartho]

The apron with magnet idea sounds like a no brainer to me. When it happens Im likely to become a customer. Until then- eh maybe, if I can hack a similar fix. Maybe they could make an after market fix. perhaps an iron on is feasible, make it easy. Also a passthrough window to the cab option would be nice.These suggestions have been in the works for several years with no upgrades I know of.Even given covid times Id hope fore a better responce.

[bdkw]

How is this waterproof? Any water running down the sidewalls would soak through the velcro and go into the bed.

[davidpavey]

I have been searching YouTube for truck camper setups. You either have to go with barely being able to sit up, needing a really tall topper, buy one for 5 figures, or building a camper set up that has a ton of wind resistance. I looked at one video where a guy built a pop up truck camper but I thought it would be hard to keep the roof water tight. Your product solves all of these problems!!! Is there any bed topper your company recommends over others? I think I will need to order one of your setups after my new Ford tremor comes in.

[pedrohaonade]

It look like a great idea, however, if you consider the cost ( how much, I have no idea but I think it may go up nearly a thousand dollars). Then I think it will be better to replace the topper with a higher clearance, so just save you times and space too..

[mariemccoy]

Thank you very detail and answered all my questions.

[penelopegreenland]

What is a safe wind speed for full extension? Can you leave it up at any point? For example, can you just raise it 12" and leave it like that while camping? Thank you,

[mkingit]

What about high top topper like the leer 122...

[Likeohmyme]

You have to put the side on with Velcro? Drop the price at least $500…

[joesalemi]

I am concerned that water will enter the bed along the Velcro edge. There wouldn’t have to be any wind. As soon as the canvas gets wet, water will collect in that Velcro edge. What stops water from leaking through the canvas?

[dontwitty]

Why no pass through window, makes no sense

[bwo]

I'm curious about how this would work with a truck bed that has a spray-in liner? I don't know how well the velcro would adhere to the liner... Doesn't look like I can expect a response from the manufacturer since they haven't answered anybody asking about rain getting in at the velcro

[michaelmcnamara]

Love the camper option, but what keeps rain from getting in past the bottom Velcro seal on the sides?

[ObamaoZedong]

Drinking game: take a shot every time he says 'pretty much'

[jamesrodriquez]

Not even one response from the company addressing the rain issue. That convinces me to not buy from them.

[schulze]

YOu need an access window to the cab of the truck

[davidkozelsky]

When you invent a solid sides for the same price you’ll have a winner.

[Likeohmyme]

You need waterproof zipper not gross faulty cheap Velcro

[vk]

Namaste, I am from India and interested in buying this topper lift for my Isuzu D-Max V-Cross 4X4 Z prestige model 2019 Indian version. Kindly share dealers details from India or how you can export to India and at what cost including all taxes and transport transfers.