Top 2 Reasons Why Your Engine Valves Bent

Learn the causes of bent valves

❗️If you find this video helpful, I would appreciate donation to the channel or a $uper Thanks that can be found below the video.

Cheap Way To Check For Bent Valves Without Removing Cylinder Head

💰Save money on your car/truck maintenance and repairs:
Top 3 Reasons Why Your Car Won’t Start
Don't let Timing Belt Failure Happen
3 Symptoms Of A Bad Water Pump
Don’t Ruin Your Engine By Neglecting Engine Oil Filter - Simple & Cheap Maintenance
Why Does My Car Battery Die So Fast
Replace Timing Belt Before Engine Damage - Know Signs & Symptoms
Watch Out For Carbon Build-up That Can Cause Misfire
Top 6 Gas Saving Tips
Fix Sticky /Hard To Push Pedal - Simple DIY
Look what happens when you neglect your engine oil
Gas Pedal Sticks? Car Jerks? - Easy DIY To Make It Smooth & Safe
What Does An Exhaust Leak Sound Like? - And How To Find It
Clean & Test A Fuel Injector - Best DIY
Check your Engine, Coolant, Transmission, Power Steering Fluid, and Brake Fluids
Blown Head Gasket - Don’t Neglect Your Cooling System- Look What Happens
Don’t Get Stranded With a Dead Battery in Winter - Do 3 Top Battery Checks Now!
What Does Engine/ Serpentine Noise Sound Like And What Does It Mean? - Squeaking & Squealing Noise
Always make sure your lug nuts are TORQUED and not done with an impact gun
How to diagnose and replace wheel bearing going bad on any car
Learn why the tire pressure is important and how to check it in your car
Remove and replace Broken or Stripped Wheel Stud on most cars
Cheap Way To Check For Bent Valves Without Removing Cylinder Head
Fast and Easy Way to Restore Faded Car Paint and Scratches - With Minimal Tools
The Best Way To Fix & Repair Broken Wire in Your Car - Soldering Car Wires Together
Car Air Conditioning AC Not Working? - Diagnose And Maintain It At Home
Replace Windshield Wiper Blades in 1 Minute

✅ Used Car Buyers Checklist - Private or Dealer - 5 Top Tips

⁉️QUESTIONS
If you have any questions or I missed something, comment below and I’ll answer and try to help you out
If you find this video helpful, like it and subscribe to my new channel. I’ll have tons of videos on all kinds of car and truck repairs in the future.
#motorcarnut
⚠️Disclaimer:
The videos on Motorcarnut channel are posted with informational purpose only.
Information posted in this video does not guarantee any particular result. Use this information provided in the video with caution and at your own risk. It is the responsibility of the viewer to take this risk.
Motorcarnut is not responsible or liable for property damage, any loss damage, or injury related to or resulted from information posted in this video.

[ivanvega]

Once again, your videos are superb! Keep them coming. You have educated me on a lot of stuff sir. Thanks! You should make a video on how to remove the valves and springs on a cylinder head and what tools you use!

[nataliescott]

Hiya. This is greatly explained. I have a 2017 vw polo. My engine light has been on and off for 2 months and I’ve had new spark plugs, new ignition coils, the mafs has been cleaned as well as other parts. The engine light is still coming on and the car is rough when starting, engine misfires, acceleration hesitates etc. So would you say that the next thing to look into would be to see if it has sticky valves?

[jamesdoes]

So can u explain to me how my valve got bent, no marks on piston, and is a push rod engine and everything in time

[musclefactory]

Impressive I just learned this. I’m doing everything on my N20, you’re teaching me everyday 👍🏼 Thank you.

[DenfordTakawiraMashenjere]

I have Vauxhall 2.4 the timing chain broke and bent valve what would be the best solution to fix

[jimdrechsel]

How can you determine bent valves without taking the head off? After adjusting preload I had some clatter that diminished and not I have a puff of blue smoke when hitting the throttle.
Would there be popping up in the intake? Popping out the exhaust? Or can the bent valve be not bent enough to cause popping?
Will a compression check confirm? Thanks for the video

[jodytho]

Thank you for your well made, informative videos! I was hoping you might be abe to answer a question for me. My timing chain jumped on my 2012 Audi A4 B8 and bent the valves. During the process of the RR, could the oil intake/outlet pipes on the turbo have been damaged? When I got my car back from the mechanic, it started hemorrhaging oil! Thank you again.

[christopherjohn]

What if the valve is seated flush but not moving when you push on it

[SunsyloSouvannaraj-rhzm]

Question I changed the water pump and timing belt on my 2005 civic and the wouldn’t start due to the timing are off I redo it about 4 times do you think I value bent any one feel free to respond thank you 😀

[bhavish]

Hello bro had diesel poured in my audi a5 2lt tfsi and ive changed, throttle body, hpfp, 4 new spark plugs, coilovers were ok. After diagnostising again 2 cylinders not receiving compression. You think its the pistons or bent valves? Btw everything has been purged and new petrol re inserted already

[Artem-ojr]

I’m wanting a better understanding of what my engine is doing, I have a strange noise coming from the intake side. I could hear it through my air intake, is it possible I could send you a video somehow and you could take a listen and I could further explain what happened?

[giulecelectricalservices]

Hi, I’ve got a 351 is there a way to check the valves without stripping down the engine

[KewanyaiDoster]

Could my valve be bent because milky oil keep getting into cylinder four

[ChelseaKeary]

Why bent only 5 inlet valves. Are the spring the same for for exhaust and inlet

[frankieb]

Just Found out my 98' Toyota Rav4 2.0 L is a Non-Interference Engine.Yes!Good News I suppose.My Belt Timing Belt busted and I was like "SHIT.."😢(Already had the "Piston" inn Back of my Mind.