How to Solid surface high gloss process

This is how you can sand and polish a solid surface and get a high gloss finish.
1. Align the P320 abrasive on the pad on your Mirka® DEROS 650CV
2. Start sanding carefully in logical movements
3. Change the abrasive to a Novastar® P500
4. Sand again and clean surface between steps
5. Moving to damp sanding, fit vacuum block
6. Fit the Abralon® 1000 abrasive on the vacuum block
7. Spray both the surface and abrasive with water
Decrease the speed so the water doesn't splash
8. Sand again and clean surface between steps
9. Change the abrasive to Abralon® 3000
10. Spray both the surface and abrasive with water and sand and clean again 11. Time for polish: Fit lambswool pad on the machine
12. Apply Polarshine® 10 compound moderately, shake the bottle before use 13. Spread out the polish on the surface, do not use too much polish
14. Set the machine to around 1000-1500 rpm
15. Start polishing, apply moderate pressure on the machine
16. Clean the surface