6.7 Cummins Hasn't Started In 3 Years!

[Cmw]

Dam. Their truck has been down for 3 years because someone wasn't paying attention when hooking the connectors back up. Good job figuring out the problem

[gavincollier]

Leave it to dodge to make the connections interchangeable ☠️🤣🤣

[anticommie]

As an avionics tech, I cant tell you how many times a week long troubleshooting effort reveals something as stupid as this as the culprit and when you tell the next shift what it was, everyone is pissed off and calls you a liar.

[skstibi]

I paid $1500 for a truck with about $15, 000 worth of new parts on it because the guy couldn't get his project to run and wanted it gone. I swapped the fuel lines around and she fired right up lol

[brandonstonge]

That’s rough 😂 did an engine swap and then sat for 3 years just because a couple of plugs were swapped

[Dave-in-MD]

I'm reminded of a '86 Mustang I bought once. Guy was selling it because it wouldn't start. I popped the hood looked and then dropped the hood. Confirmed the seller only wants $350 for it. I paid him and got the title. Then I popped the hood again and turned the battery around and it started right up. Noot sure why it didn't fry the ECU. Funny thing was, the guy was an electrician.

[ROSS]

I bought a nice Pontiac Grand Prix once, the engine had a bad miss, they told me it needs an engine. I towed it home and found two crossed spark plug wires. Swapped them back and "Vroom". Fixed.

[ScottWConvid]

That's one extremely happy customer right there!

[Bigitaly]

Back to basics....check check and check again because it's easy to forget something or skip a step when you balls deep in a project

[Wildcat]

Well done. Observations and a solid diagnostic routine are key to successful diagnostics leading to a correct repair.

[chrismannifield]

I had a customer from B&T come in, was told they needed a whole fuel system.
Nope, pins pulled out the c130 and loose ecm connections. Harness wasn't in their budget, but some pins and zipties were...

[BigDipper]

This is how you know this man knows what he’s doing. Good work.

[mattjohnson]

That customer was so happy l can imagine. 3 years Damn

[Thebitnemesis]

Just graduated from auto tech school and these videos always makes me smile because it's always the littlest things for so much work.

[AlanMichaelJackson]

"That'll be $4, 673.78 for the repair sir"

[jamesgizasson]

That's a very nice exhaust manifold! :3

[brokenwrench]

Wow, what a bone head mistake. We’ve all been there at one point but most of us keep digging until we find the issue. Hope you didn’t kill their wallets and their egos 🤣

[robv.o.]

Had a 3.3 no start...
Some guys changed the engine.
The crank sensor and tps were swapped..
Older 1.9 liter vw diesel have 2 identical connections at the engine shutdown valve. When in the wrong places the valve doesn't allow any air into the intake manifold 😊😊

[markroadkillrecovery]

I had a guy buy a used good trans from me then complained it wouldn't shift. Before I could go over and confirm he sold the truck. He didn't have output speed sensor all the way in. Great work

[pnwDatsun]

Hasn’t ran in three years and still has the tow mirrors out 😭