Crankshaft Position Sensor Install

This video demonstrates the process of properly aligning the CKP sensor on a Mazda 2.3L Turbo MZR engine. This process is applicable to both the Mazdaspeed 3 and Mazdaspeed 6 vehicles.

[albertZ]

Could you please make a video about timing chain. Your video here is the clearest one on youtube and very informative. You already did the first part of timing in this video.

[juankamunoz]

Genial, este es el mejor video con excelente informacion tecnica, saludos y felicitaciones a usted desde Guatemala 🇬🇹.

[Mister_CVC]

What happens if this fork is not used? Bevause 2carpros video did it without using the fork. I did it that way and my car is working. What possible errors or issues could arise? Thank you. Also didn't use the longer peg.

[Abdulussii]

Thanks bro. You just helped a brother out. I'm going to correct my error tomorrow

[SrColon]

Wonderful video, thanks you very much.

[Nelsonydavid]

Muy buena explicación, lo felicito... que largo es el tornillo alineación del cigueñal, muchas gracias!

[stephendrake]

Would this work on a 2007 Ford Fusion 2.3 l

[gamefadayz]

Good Video answered all the questions i had to setup this sensor properly.

[wegiel]

My question is what if crankshaft position sensor has bad adjustment? As I know if is really bad the engine wont start. But what if the mistake is really small it can cause misfire or something?

[edwardkalubamalama]

To the flywheel, where does it get connection

[kevinmiranda]

Is it the same in Ford's 2.0 t ecoboost engines?

[troymetzler]

The same exact motor the cam sensor is 20, 000 because I took the gap on it before I loosened up the bolts I put a $20, 000 fuel gauge in it it wouldn't go in

[fernandoterrasas]

Speed6Dan, Hi Dan, Do I have to take off whole engine from de car, in order to replace that sensor??, I have an Mazda mpv 2000...very clear video and Thanks

[markdwyer]

So why not just mark one tooth with a paint pen before removing old sensor and just line up on that, it`s not rocket science

[joehyundaitech]

what size allen was that and also the crank bolt nut size please ?

[ryanmemolo]

So after doing all this I found that when I go to count the 20 teeth, my CSPS isn’t able to line up with the 20th tooth, unless I rotate the crank shaft counter clockwise just a little bit to have it line up at the highest setting the sensor will allow. Idk if I’m doing something wrong or if I have to take the valve cover off and align the cam shafts with the plate then do this. Any help would be greatly appreciated!🙏

[valsmolar]

Do you have to use timing peg on skyactiv 2.2 d from 2013??? I can’t find any pegs for skyactiv engines…

[dtnel]

Would this be the same or similar for a 2010 Ford Escape AWD 2.5L Engine?

I ask if same being Ford & Mazda are "Family"...

Any help greatly appreciated as don't want to blow something up after the hard work of swapping the bad vs good used engine.

[billydeaton]

What is the tooth count on a 2.3 ford fusion 2008 stock motor non turbo ? Thanks 😊

[sterlingwitherspoon]

WTF. All this just to change a Crank sensor…..