Inverter generator won't start. How to fix a portable A-ipower 2300w / 1800w SUA2300i, SC2300i. #diy

#wontstart #Aipower #invertergenerator #SUA2300i #SC2300i

In this video I will be showing you how to repair, how to fix a portable inverter generator that does not start.

Please Note: Always refer to the generator owner's manual for specific maintenance information.

Follow me on social media:

Thank you for your support!

#portable #inverter #2300 #2200 #1800 #howto #fix #repair #gas #power #rv #tailgating #camping #carburetor #clean #pilotjet #fixed #mainjet #dirtycarburetor

[Obszidian_]

Thank you so much. I am currently in PR struggling with power and my generator was acting up too. Saw this video, got my hands a little dirty, and I was able to turn my generator back on.

[RichardSokoll]

Excellent video. Exact model I have and the exact problem. After reassembly it took 3 pulls to start it. Only one screw left over when I finished!! A win for the Army vet!

[FabianDelValle]

Thank you! Followed your steps and brought my generator back to life. Took me around 2 hours as it was my first time attempting something like this and was extra careful.

[elleissej]

Excellent job. Great video tutorial. Save hundreds! Thank you.

[josejulianramirez]

Thanks for this video. I follow every suggestion and it works great. You just save me hundreds! (And my wife is happy😅). We live in PR and the power utility is very fragile since hurricane Maria. 👍

[eloriental]

Thank you very much !!! I follow your instructions and I fix my generator !!! God bless you and continue with your videos... 👍

[MrBoricuahastalamuer]

Mano la verdad que me salvaste. Tengo esa misma pero version Costco ( color azul) y estaba teniendo el problema que salia gasolina por el rotito de aire en el carb. Y tu video resolvio el problema.

[mariterevigoreaux]

Maravilloso. Complete los pasoso y prendio la planta. Gracias ❤🎉🎉

[OakTreeSouth]

Great video! I sure would like you to do a review on one of our portable inverter generators!

[sailingkeylimepie-pirateflag]

Perfect video. Thank you. Back in business...

[Forged]

Thx man !! Great Vid and practical clean of the Carby

[DanielVelez-md]

Saludos, tengo ese pero en color azul(yamaha)...y no mantenía la baja estable, ese mantenimiento me fué de mucha ayuda...gracias por compartir.

[ajfognani]

Followed the way you went through the generator and mine starts now but no power. Any suggestions thanks in advance

[JJVFever]

Gracias AMigo! saludos desde Barceloneta PR. Te pregunto al finalizar encendio subiendo y bajando ella se estabilizo sola? o hiciste salgun paso adicional. Tengo una pero la caja azul de costco y lo que me hace es el surge en revoluciones bajas. si le mantengo apagado el boton de tortuga ella corre bastante bien. pero en revoluciones bajas sube y baja el idling.

[samquinn]

Instruction state first pull in the choke position and then only 3 more pulls max in the start position. This would avoid flooding the carburetor. Your first pull was in the start but should have been chock. Good video about cleaning the carburetor but notice you did start in the choke position at the end of video and it started right up. A new carburetor would have run you $45.

[Jonatan]

Saludos
Excelente demostración. Para el modelo SUA2000i será similar ?

[eltoro]

There's another main jet and emulsion tube up in the pipe in the bowl???why didn't you bother to clean those??

[yamahagrand]

Excellent video. I have the same model and I've only used it a few times over the past year just to run fuel through it. The guages on mine that display fuel level and power load have never worked. Since I noticed that you had the front panel off of yours can you advise if those displays might be connected to a connectirized cable that could have come loose? Thanks and keep up the great vids.

[nathanaelayala]

Hey!! I took mine out today to maintain it. Didn’t start. I clean everything like you showed.

Now it does starts but it shuts down under load 😏😏 what can I do??

[happymother]

Es el mismo modelo pero el listón para jalar está duro y no se jala .. estoy perdida no se que hacer en este caso.. me puede ayudar oh guiar