CAN AM X3 DIY OIL CHANGE & DIFF SERVICES

Full maintenance day on the X3! Oil change, diff services, chassis lube etc...

SP Tools Flood light used:
Use code RUSTBELT at checkout for 10% off

Got all my fluids from Ride 1 Powersports in Springfield OH👍🏻

[MrRiverrat]

Thank you for the very detailed explanation on changing all the fluids much appreciated here in Missouri for sure five stars for you brother thanks

[RC-qhwj]

Thanks for the front diff fill behind tape recommendations- couldn’t find it

[jonschnell]

Great Video!!! I have a question on the front differential. What weight are you using? Is it the same as the rear? I ask because I bought the service kit and the diff fluids were 2 bottles of the 75W-140 and 1 bottle of 75W-90. I assume that the 75W-90 is for the front diff?

[oscarpalacios]

hey brother congratulations for your video I need to do it to my x3 max only I don't know English but with your video I understood very well just from watching it and I have to use the translator to write how many liters I have to use for differential and transmission

[patconway]

Great stuff, why do they have 2 drain plugs any idea ?

[ronthompson]

Great tips...one reason to watch these. Even if you know how... watching someone else can very often result in little tips. Used by someone else and you say dang, how did I not think of that... so simple... inserting the funnel lol... so simple lol.. Btw, nice shop, or is that the dealership where you work ? Great show, thanks...

[espritmike]

I've got the same car and that same rack at my shop- good taste!

[dustyfarmer]

If that bearing greaser doesn't have a 31mm internal diameter hole that slides over the 30mm axle splines on the XRC Turbo RR it aint gonna work. I bought one on evilbay that had that stepped lip in it & it was way too small (26mm I.D) to fit over a 2021 XRC turbo RR axle spline. I did get the right one but had to pull out the O-rings out of it as they are a tight fit & won't slide in with them on, still worked OK but it may be easier to take the knuckles right off & grease them.

[codysautodiagnosticsprogra]

Nice ride bro!!! We need to meet up one day
and go ride together brother. It would be a blast.

[kevinnnsito]

Hey man, I just did the first engine oil maintenance.

I filled the oil level just above the max line, I took the car for a ride and in about 10 minutes it turned off while driving and it won’t start.

If I let it sit for like 15 or 30 minutes it start but for like 5 seconds.

You think that overfilled oil level can cause this ? And how can I solve it ?

[shawnmaples]

Greasing the bearings with that tool is what causes failures

[jbauern]

Why not replace the rivets with something else?

[sm.offroad]

Don’t see the last name Mehr too often.

[UpintheAir.stream]

Would not recommend RIDE 1. in Springfield OHIO.

[chuckheinch]

Tha ks for the vid. The best one ive seen on this maintenance.

[bogie]

Great info thank you for taking your time to explain the key points you got yourself another follower

[garygullett]

Like how you cut out the part where you put the front diff fill plug back in. It’s a PITA. Lol

[XCountryAdventures]

Very well done sir. Right to the point. You just earned yourself another follower.

[sheputthelimeinthecoconut]

Got lucky on your front diff. Changed mine at 50hrs/600mi and I just about shit myself when I saw the amount of sparkles. But it’s about due for another service and hasn’t exploded yet.

[daveyio]

If you wanted to you probably could drill out all the rivets and install nutserts into frame so you could bolt the skid plates on.