How to EASY Pull Out Speaker Dust Cap in HOME DIY

How to EASY fix, repair and pull out damaged dented speaker dust cap in HOME DIY. Most people who use speakers will eventually end up in a real pickle of a scenario where the speaker dust cap gets dented. Fear not, today we'll be going over on how you can easily avert this crisis. It can probably be fixed by one of the three methods we'll be covering in this video. You can replicate these methods depending on what tools you have on standby. A needle or a syrringe, gorilla or ducttape or basically anything thats sticky enough or just a regular vaccuum cleaner, preferably one that has a removable tip. Though, like mentioned before, we recommend you use a speaker grill instead of applying these techniques.

Bluetooth AptX Receiver on Aliexpress:

Bigger Logitech Z906 speakers on Amazon:

Newer Logitech Z623 speakers on Amazon:

Bluetooth Receiver on Amazon:
affiliate links

Thanks for watching, leave a comment on whether or not you would leave it as is or try fixing and smash the piss out of that subscribe button.

🇷🇺 Hазвание видео: как ЛЕГКО выровнять колпак на динамике - Сделай сам

-----------------SOCIAL-----------------

-----------Video playlists--------------

0:00 Pull Out Damaged Speaker Dust Cap in HOME
0:39 1st Method - vaccuum cleaner
1:39 2nd Method - syringe with needle
2:00 3rd Method - gorilla or ducttape .

DISCLAIMER: This video description and comment section contains affiliate links, which means that if you click on one of the product links and later buy the product, I’ll receive a small commission. This NEVER affects the price you pay, and it’s an easy way to support the channel and the work that I do. This helps support the channel and allows me to continue to make videos like this.

Thank you for the support!

[Techscrews]

Bluetooth AptX Receiver on Aliexpress:

Bigger Logitech Z906 speakers on Amazon:

Newer Logitech Z623 speakers on Amazon:

Bluetooth Receiver on Amazon:
affiliate links

[CyanideLovesong]

OMG. My little girl pushed in the dust cap on one of my Avantone Mixcubes. Your vacuum cleaner trick pulled it back to normal and you can barely tell it ever happened. It's about 99% back to what it was visually, and in terms of sound -- it's perfect. Thank you for this video. I was so depressed when it happened because I can't really afford to replace it right now.

[OmegaMizik]

Vacuum cleaner WORKED like A CHARM 🔥🔥🔥 Thank so much 👊🏽

[tims]

I tried the vacuum cleaner trick and it wouldn't work. I thought that maybe if I got the dust cap wet, it might help. I got it damp with a sponge and tried the vacuum again. It popped right out!

[capthk]

Gaff tape works pretty good for pulling out the dust caps too.

[altops]

for poly dust caps i recomend warming them up with hair dryer, before and after recovery.

[musiqofficial]

Personally I take the speaker out and blow air hard through the air hole at the back. this method works for even dust caps that are very stiff

[waveatelliot]

Informative with a hilarious narrative :)

[Flow-Joe]

I just tried method 2.5 and it worked for me.

What is 2.5? I put multiple (5-6) layers of thin cut stripes of double sided tape, somewhat randomly, on the dust cap and poked with a needle into/between the layers of sticky tape and managed pull it out, without damaging anything. Worked better than expected.


Thanks for the tipps.

[AUTISTICLYCAN]

I have a Pioneer HPM 100 woofer coming to replace my broken one. Problem: the replacement woofers dust cap is a bit dented but is likely recoverable. I will try thin strips of tape and micro pressure to pull as many dimples out as I can. I don't care if it's NOT Absolutely perfect. I want it to be pretty at a glance. If someone stares at the dust cover though the cover mesh I don't care that they see my dimpled speaker cap. I have a pair of clear Lucite Promo Pioneer HPM-100 speakers in my living room with near perfect dust domes. I wont try the pin method unless my brother can find super thin surgical needles or pins. I was happy to hear you say a dented speaker dust cover does not affect sound quality.

[lordlollops]

Tape ( heavy duty )worked a dream - thanks 👍🏻

[philipiano]

With the puncture and pull method. Push in an L shaped wire. Work around the dent. No need to have multiple holes. Fill the legacy hole as shown. 🤓

[DipicGamer]

i ended up gluing the side of a glue stick (used for glue guns) at the dust cap and pulled up ant it worked like a charm!

[silvertamman]

I have used vacum cleaner with mixed results. Managed to fix mb-quart midrange driver dustcap, but sucked In whole diafragma of s30a tweeter.

[stugant]

The vacuum technique works very well if spritzed with a little water.

[Dj.Harmony]

Do you have a tip for a smaller speaker bc my dust cap is from plastic and is very small

[Random_]

Usually i just use some strong tape it works great!

[housingshame]

I used very tacky electrician tape and it worked straight away. vacuum cleaner didn't because the inlet was smaller than the dent surface area. thanks

[sonivaijo]

Personally, i prefer using the tape, it always success pulling the speaker's dust cap back.

[benjimenfranklin]

All i can tell you is how i do it. I use masken tape. Put an end on the dust cap an GENTLY pull, it usually comes right out 😊.