English ON/GO How to do an OnGo test for Covid.

How to Take an On/Go test for Covid -19
Wash your hands for at least 20 seconds

Open the box.
There will be two tests in the box.
two test strips, two swabs, two small containers of liquid and two caps for the bottles of liquid.
Open the test strip and put it on a flat surface.
Place the container of liquid in the tray and peel off the lid.

Take the swab out of the packet, and gently insert the swab into your nostril. Slowly rotate the swab at least 5 times for 15 seconds.

Take the swab out of your nostril and place it into the other nostril. Slowly rotate the swab at least 5 times for 15 seconds.

Place the swab into the liquid. Rotate the swab at least 5 times.

Remove the swab by rotating it in the container and squeezing the sides of the container, getting as much liquid out of the swab as you can.


Throw the swab in the trash.

Take the cap of the container and
Close the container by pushing the cap firmly down

Squeeze the container gently, and put three drops of the liquid into the test strip.
Start a timer for 10 minutes. If you leave it longer than 15 mins it will not be an accurate result.

If your test is negative it will look like this

If your test is positive, which means you have Covid your test will look like this. Even if you have a very faint blue line it still means you have tested positive

If you test positive and you need assistance, please call USCRI on 802 655 1963, AALV on. 802 985 3106 or call 211