Solid led on your elrs reciever ? How to fix a expresslrs reciever stuck in bootloader mode .

In this video we use a ftdi adapter to flash a elrs reciever stuck in bootloader mode .

Thanks to the elrs website and Facebook group for help trouble shooting.

Want me to give you a shout out in my videos ? consider joining my patreon below .

Support the channel
‐----------‐‐-------------------------------------------------
Become a patron
‐----------‐‐-------------------------------------------------
Wishlist
‐----------‐‐-------------------------------------------------
PayPal donate
‐----------‐‐-------------------------------------------------

Matt

[deltageek]

Just wanted to say it should be possible to do this without desoldering it, just bridge the boot pad and use the 'via_passthrough' option in the configurator. The only thing is you HAVE to turn of telemetry in betaflight or else it confuses the bootloader.

[rahulwatharkar]

I was scared when you inserted Red wire in Ground and Black wire in VCC :D

[mamoshimiloni]

Please help I have the same problem. But the biggest problem is that I have bout darwin baby abe 3 of them and noon of them I could get to work. they burned up before I could even fly. so now I am sitting with the last one, it has the build in reciever. I had bind it to namoni tx module at some point but now what ever I do does not help. any idea's ! Thank you

[alantoseland]

I'm glad I've just watched that as it was driving me mad. do you have a link for the ftdi adapter please

[tsfpv]

Just remember once you've finished flashing that you have to unbridge the boot pads then you should be good to go 👍

[mani-]

am about to buy the ftdi adapter but there's no pads to bridge on my RX SX1280 MINI would that still work? thanks for your video 🙏

[madforit]

Just done but no stick movement on betaflight and the right port is selected and binding fraise are the same

[crank_FPV]

I’ve been getting failed flashes constantly and it’s making me want to switch to crossfire..flashing can be a nightmare if they fail

[higormoreira]

I have problems with a jumper receiver... it is giving RX Lost and critical signal even close to the RX both TX and RX are in the latest version 2.5.0 and I don't know what the solution is anymore... help

[riggerss]

do you have to remove the bridge on the rx once it is flashed?

[BillyBigRig]

From FB, a lot of people are reporting 3.01 is bricking the receivers. Go back to 3.00 Two of mine got bricked.

[Camilookb]

dude thank you so much, I got the adapter and now it works.

[danielsimental]

I was having the solid light on my jumper aion mini rx. I was finally able to flash it via wifi by soldering it to a 5v power regulator but even after that I plugged it back into my protek25 and it would not detect…. Just solid light…

[typeOhh]

Hi. I'm not getting stick inputs after binding an elrs Flywoo nano 1s to jumpter T lite with a happymodel 2.4 rx. Any ideas?