MARTS BTX8 Hands down cleanest budget car audio DSP digital signal processor

Looking for the best car audio DSP that won't break the bank and puts out a CLEAN signal? Here you go!
Link for DSP here:

Coupon code for Surge Audio – use code HiFiVECTOR at checkout

Enjoy the content? Support and Donate to the channel to help me do more products reviews

All donations will go to products for review. Disclosure: All products I review were purchased by me for the purpose of this video. Or provided by fellow bassheads. All of the opinions in this video are my own and the content wasn't reviewed by anyone prior to posting. Affiliate links are provided for your convenience. I receive a very small portion of the sales from these links, which help me bring you more unbiased content for this channel. Please subscribe to my channel so you will receive notifications when I upload new videos. Subscribing also help me do more video reviews. Thank you so much for watching

[csj]

No laptop required is the cat's pajamas.
Time alignment
Equalizer (for each channel)
Parametric equalizer
Crossover/filter (independent for each channel)
Crossover slope selector (12, 18, 24dB/octave
Phase inverter
Input gain level control
Output gain level control
Looks like it checks all my boxes

[Mr.Thermistor]

After a thorough review of dsp on the market i ended up going with this one thanks in large part to your video. I have had it for over a week now and it has totally changed the game of my system. I love bein able to run the dsp app straight from my android headunit and then using the dayton immc-6 mic connected to my phone to rta tune my system. Couldnt recommend this enough if you have a similar setup 👍 im still learning new things about dsp control and each thing i learn improves everything that much more.

[davidwhite]

I'm glad I came to your channel today. I have been looking at dsp's for a couple months now. Was about to buy a refurbished jl audio twk 88 for over 350$ or buy new for 500$. I just bought the btx8 because of your review. Your info and reviews have always been solid plus when saving that much money I had no choice but try it lol. Thank you

[CL-ypbs]

Having high RCA voltage is very important if you want to keep the gain down on your amplifiers to avoid a high noise floor. Alot of amps with poor signal to noise (manufacturers LOVE to lie about the s/n numbers) need the gain down low or you will hear noise. 4 or 5v is plenty. I've owned DSPS with 2v all the way up to 8v RMS on a helix DSP ultra and i can say that if you have a solid 4v or higher it is sufficient for the vast majority of applications.

[yougod]

I picked up two Expert 2 DSP's that you reviewed and they both have a faint background hum. This unit must be cleaner and is built more robust.

[ronmerkus]

That's cheap for that DSP with that hot of a signal because you are right. Most DSP is giving a low voltage signal, which is nothing wrong with . But once you have that listening experience of that pure clean signal at a higher voltage, you are like DAMN !!!

[BurningDownUrHouse]

i had one of these in my amazon cart for a few days and decided to look up a review, found your video. after watching your video i hit the order button! excellent review with nice detail, love the sine wave and voltage test!

[johnviera]

I have the Expert PX2 Connect DSP It looks like it’s the same design circuit and software. It works fantastic.
The time alignment is amazing to sync up your front speakers with your subwoofer

[BigJeffAudio]

This DSP is clean and works really well.. Thank you for the true and real review..

[bennyblanco]

The benefit of having high voltage output on car amplifiers for RCA connections primarily revolves around improved noise rejection and reduced stress on the amplifier. High voltage preamp outputs allow for a reduction in the gain required by the amplifier, which in turn reduces the potential for noise in the system. This is because a higher input voltage to the amplifier means that the amplifier does not have to work as hard to amplify the signal to the desired level, leading to less distortion and a clearer sound

[TheWjbrown]

I have one, the only issue so far is the Bluetooth signal is very week, I have to leave my phone in the car are it will disconnect. With my Expert Electronics DSP I can go about 30yds and still get a signal.

[caviator]

If you drive all the dsp channels will the 5 Volt clip go down to the 3.5 Volt advertised? I wonder how much the small power supply in those dsps can handle in real world applications.

[phila]

Just ordered one with your link and discount code.

[DemonOfFury]

Wonder how the prv audio 2.8x holds up to this. It claims 5 to 6 volts for input and output

[kenrickjebo]

Can do a video like this on the expert xair8

[Steven---]

Nice. I'd have 10% max gain memory setting, for when people borrow my car.

[johannjohann]

Most head units send a 1 - 3 volt signal whereas an LOC will send a 5 - 7 volt sugnal. This really does allow your amp to run cooler, and last longer plus sound better. Otherwise just get an integrated amp. DSP's are still a good thing if you have enough channels. I like running 3 way systems so yeah that can be a challenge with 12 speakers in the cabin. Though there are some good coaxial speakers as well if you don't have a setup for component speakers in your car.

[Dezydezl]

Waiting for the test for the Recoil DSP that Robotunderground has!

[mpfoote]

What is the maximum INPUT voltage this can take?

[bigkevin]

So I got the DSP and I cannot get the application to work it keeps freezing every time you go to the equalizer and or equalizer on each Channel it just shuts off. Android app does not work!