How to blend paint and clear coat your car

In this episode! We overcome a common painting problem. I'll share how to spray a base coat clear coat finish with amazing results. How to set up your paint gun and help you understand how air pressure, fluid volume your speed, and spraying distance work together to produce the best results. This video will certainly help you with your repair or restoration project.

My amazon affiliate store : Tools and materials categorized to help you find what your looking for
CLICK HERE
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️

In this video
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️

R500 1.3/1.4/1.8 needle set

universal paint stand

upol clearcoat

sprayIQ Disposable mixing cup compatible with 1.0 system

aeropro a610/R500

upol 2k primer

low cost disposable cup system 1.0

astro sun light

premium tack cloths

prep solvent

raven latex gloves

3m paint mask

70% isopropyl alcohol

CHECK OUT MY OTHER HOW TO VIDEOS
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️

paint gun and clear review playlist

how to color sand and buff like glass

Autobody repair made easy

how to prepare primer for paint

using body filler to repair a dent

How to repair body damage on your car

If you find this video helpful be sure to let me know in the comments. I welcome your feedback and questions

SUPPORT THE CHANNEL
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️

LIKE AND SHARE VIDEOS

SUBSCRIBE!

COMMENT!

AFFILIATE LINKS!

Follow us on Instagram and get the scoop on upcoming projects!

Follow us on Tik tok

video equipment I use
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️

Rode wireless go

Dji osmo action

Disclaimer:
Due to factors beyond the control of Garage Noise, it cannot guarantee against unauthorized modifications of this information or improper use of this information. Garage Noise assumes no liability for any property or personal damage that may arise from doing a repair on your vehicle after watching any of my repair video's. Due to factors beyond the control of Garage Noise, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Again Any injury, damage or loss that may result from improper use of tools, equipment, or the information contained in this video is the sole responsibility of the user and not Garage Noise.

[JohnWDTC]

Very helpful video Chris I like the fact that you include the bad along with the good, some painters don't show the bad where they get runs or reactions in their finishes but you show it how it is plus you also explain how to fix or work around them.

I mostly use sealer before basecoat but even then my first coat of base is always a light dust coat as this reduces the chance of having problems🙏👍John UK

[okde]

Thanks again for another great video I usually watch your videos over and over again.

[richardjeun]

Hey Chris, you helped me a lot on some of my questions so I want to help you reduce spillage when pouring your reducer out of the bottle. I’m not sure if you know this, because you could have been in a rush when shooting a video, but next time you pour that reducer, try pouring it from the other direction. In other words, spin the container around 180 degrees before you grab it and start tilting it to pour. I do this method for engine oils too and it never makes a mess. If you pour it the way most people think is the correct way, the fluid coming out always catches the corner rim of the container, causing the fluid to run down the side of the container.

[frankmaceyka]

Great information. I’m doing basically the same repair with the same fisheye issue. I’m going to re wash with the isopropyl a few times and go at it again using your tips.

[OzMediaOfficial]

Alright this is something that's bugging me and its more of a technical question.

When blending in the paint, is it acceptable for it to be on top of the sanded clear coat? Are there any prep steps beyond sanding that should be done to make sure the blended paint adheres to the under layer of clear coat?

[Alaska_Engineer]

Love the videos! Been a hobby restorer since the 80’s and you’re really helping me up my game! …. A hearty THANK YOU!

[Here--Learn]

Id like to see it all buffed out. It looks like you’re looking right at where it’s hitting I know it takes a little bit of time to learn the timing so you don’t get sags or runs. I’m going to have to watch some of your other videos where you do larger pieces or the whole car. I don’t paint cars I’ve only probably painted about five in my life but I have always wanted to paint houses and cabinets doors whatever I love to spray. it’s funny the different types of spraying houses use an airless most of the time Cabinets I use the HVLP or pot sprayer which is similar to what you’re doing. I’d love to get into automotive painting I think it’s something I would enjoy I’ve only done auto body when I was younger . You do a great job everything looks really good I enjoy your videos

[clemp]

Looking for a first gun for home use. I have a 60gal 5hp 12.5cfm. I have watched your vids on the Astro tool EVOT13 and the Aero pro R500/A610. I have never painted a vehicle before and am replacing a door and bumper cover. I am learning as much as I can so the only mistakes I hope to make is just being a new painter vs equipment issues. Thanks for all the instruction and help!

[bendafixer]

So satisfying to watch your videos. I just painted a fiberglass hardtop and discovered the role static plays while painting 😢

[wayneodonnell]

Thanks Chris … the best video’s on the tube with a heap of tips 👍

[serviceproper]

Thanks for the video it was very helpful. I'm trying to fix a small dent on my harley rear fender. So once I fix the dent and prime it, I'll sand the whole entire rear fender with 600 including the spot so that when I paint and clearcoat everything will be filled in like in the video?

[davegallinger]

Great videos!!. How would you blend paint and clear up to a body style line? I guess the question is: how do you end base and clear at the body style line and then wet sand? Wouldn't there be a suttle line as the paint and clear end at the same point?

[megatonesilva]

Great does "flash off" mean? Does it mean the paint heats up due to chemical reaction and then he paint cools off?

[richardjeun]

Also, doesn’t isopropyl alcohol contain some water, which then can penetrate into the urethane primer? I use denatured alcohol (I don’t know if this is better).

[spencerbackhaus]

I do a lot of painting all the time here in California. We used to be able to use what was called Naked Gun to clean our guns now we can only get acetone to clean the guns I'd like to know what you do for cleaning your guns?

[azzyzz]

Great work.
Just a question what nozzle do you use for bass coat and clear coat ? Thanks

[drogbak]

When you say dust it on the first coat should i drop pressure from 2 bar or just half trigger?

[dodoskiherrera]

Another great vid! Thank you! May I ask what psi for same gun for basecoat and clear using an 8 gal with 4 cfm at 90 psi air compressor? Thank you.

[bandidomxgarage]

Wondering where your shop at great videos gracias

[eareeyesee]

Good videos, good knowledge, good edits. Can you explain why some basecoats get blended into a wet bed or get the diluted color blender technique but this time you used a backed-off dry dusting blend. I dont do a lot of painting but rather enjoy it when I do so just like taking in knowledge. Thank you!