Projection of Solids Hexagonal Pyramid | Triangular Faces on HP @rajagopalthangavelsforum

Draw a projection of solids hexagonal pyramid- triangular faces on the HP,
Draw a projection of solids hexagonal pyramid side of base 26 mm and axis 50 mm long lies with one of its triangular faces on the HP and its axis is parallel to VP. Draw its projections.

Projection of Solids position and Hidden Lines Shortcuts

PROJECTION OF SOLIDS
HEXAGONAL PYRAMID
1. A hexagonal pyramid, side of base 26 mm and 70 mm height rests on HP on one of its base edges such that triangular face containing the resting edge is perpendicular to both HP and VP. Draw its projections

2. A hexagonal pyramid, side of base 25 mm and axis 50 mm long, rests with one of its edges on HP and its axis is inclined an angle of 30 ° to HP and parallel to VP. Draw its projections
3. A hexagonal pyramid, side of base 26 mm and axis 50 mm long has one of its slant edges on HP such that two of its triangular faces containing the slant edge on which it rests are equally inclined to HP. Draw its projections

PENTAGONAL PYRAMID
1. A pentagonal pyramid, side of base 25 mm and 55 mm height, lies with one of its slant edges on HP such that its axis is parallel to VP. Draw its projections.

2. A pentagonal pyramid, side of base 30 mm and axis 60 mm long lying with one of its triangular faces on HP such that its axis is parallel to VP. Draw its projections.
3. A right pentagonal pyramid, side of base 20 mm and altitude 60 mm rests on one of its edges of the base on HP, the base being lifted up until the highest corner in it is 20 mm above HP. Draw its projection of the pyramid when the edge on which it rests is made perpendicular to VP.

HEXAGONAL PRISM
1. A hexagonal prism, side of base 25 mm and axis 50 mm long rests with one of its base corners on HP such that its base makes an angle of 60° to HP and its axis is parallel to VP. Draw its projections.
2. A hexagonal prism, side of base 25 mm and axis 60 mm long rests with one of its rectangular faces on HP such that its axis is inclined at 45° to VP. Draw its projections.
3. A hexagonal prism, side of base 24 mm and axis 55 mm long rests with one of the edges of its base on HP such that its base containing that edge makes an angle of 45° to HP and its axis is parallel to VP. Draw its projections.
4. A hexagonal prism, side of base 24 mm and axis 55 mm long rests with one of the edges of its base on HP such that its axis is inclined at 30° to HP and its axis is parallel to VP. Draw its projections.

PENTAGONAL PRISM
1. A pentagonal prism, side of base 25 mm and side 50 mm long, rests with one of its edges on HP such that the base containing that edge makes an angle of 30 ° to HP and its axis is parallel to VP. Draw its projections.
2. A pentagonal prism of base side 30 mm and axis length 60 mm rests on HP on one of the base corners with the base edges containing it being equally inclined to HP. The axis is inclined at 45° to HP and parallel to VP. Draw the projections of the prism

3. A pentagonal prism of base side 30 mm and 65 mm long lying on one of its longer edges on HP with one rectangular face perpendicular to HP such that axis makes 60° with VP. Draw the projections of the prism

CYLINDER
1. Draw the projections of the cylinder, base 30 mm diameter and axis 40 mm long, resting with a point of its base circle on HP such that the axis making an angle of 30 ° to HP and parallel to VP.

2. Draw the projections of the cylinder, base 30 mm diameter and axis 50 mm long, lying on the ground with its axis inclined at an angle of 30 ° to VP.

CONE
1. Draw the top and front views of a cone of base diameter 46 mm and height 65 mm lying with one of its generators on HP. The axis is parallel to VP.
2. A cone of base 40 mm diameter and axis 50 mm long touches VP on a point of its base circle. Its axis is inclined at 30° to VP and parallel to HP. Draw its projections.

[yogeshhire]

a hexagonal pyramid of base 30 mm side and axis 70 mm long has a triangular face on the HP and the axis 60 mm long has a triangular face on the HP and the axis parallel to VP. It is cut by a horizontal section plane which bisects the axis. Draw front view and sectional top view