2012 chrysler 300 v6 3.6L water pump replacement

preview_player
Показать описание
thank you for watching!!!!!

If this video was helpful to you and if you would like to place a donation, here is my Venmo and PayPal information. Or I would really appreciate it if you could share my YouTube channel on your social media. Links will be on the the bottom.

Рекомендации по теме
Комментарии
Автор

I’m about to do this job later . At first I thought it was the lower hose but no I replace the hose and keeps leaking. The only thing that worry’s me is that last bolt at the very bottom where the crank pull is at

EMEMexicaWarrior
Автор

Well could be a crack radiator like what I had a hairline crack and that was very expensive and there could be radiator hose that you don’t see until it gets to 200° and you turn off the key and it hisses out that’s another $50 for a hoseplus antifreeze oh my God that was another hundred dollars

LawrenceHanson-bs
Автор

Very nice i love how you show everything and go into detail

dubtv
Автор

Thanks man, definitely helpful gonna change mine this weekend.

DOOPS
Автор

This video saved my assss, thank you so much

keenansalazar
Автор

At 24:35 you can see a hose next to the oil filter without a plug or being connected to anything? That cant be right is it?

vosimichurch
Автор

Hellooo, i just saw your video on modifying a 2006 mercedes stereo to accept bluetooth, i was wondering where you were located and how much you might charge for a 2006 e350

Smr
Автор

So just curious if it wouldn't be easier to remove the rad fan to gain more room for the job? Or is it too much of a hassle to take out?

mickeygogo
Автор

Idler pulley 16 mm torque is 41 ft lbs or is it 13 mm at 18 ft lb? I haven't started this project yet just making sure b4! Thank you.

tango
Автор

one thing why didn't you just put a over flow paper for the bleed screw, to keep the fluid off the belt. I'm about to go outside windy and 10 deg, outside, , but Niece needs her car, and I'm that guy hahahahahaha nice job explaining

virgilmerchant
Автор

I would just remove the radiator and the front end so i could get closer to the belt

RichardSmith-iczw
visit shbcf.ru