filmov
tv
IATF 16949 Auditor Guide Part 2 | Factory audit | PFMEA and Control Plan
Показать описание
Watch this series of group discussions and onsite audits on the process approach and risk-based thinking, prioritization, focus on performance, and data analysis and synthesis.
Paul Hardiman, Dawn Banner Automotive and mobility IATF 16949 consultant, trainer, and expert, and Devin Gage, IAOB Program Manager, undertake group discussions and mock audits at Mono-Group, Hungary, to demonstrate the skills required to be an IATF 16949 auditor.
Keep watching as Paul breaks down the good, and unsatisfactory practice methods before, during, and after onsite audits.
Remember to watch out for more audit videos within the office and factory environment.
Like and subscribe for more content like this!
On behalf of the IAOB and SMMT, we’d like to thank Mono-Group, Hungary, for allowing us to use their facilities and staff, to bring you this inside view on conducting onsite factory audits.
Watch and learn about best practices to gain insight into IATF 16949, the global Quality Management System Standard for the supply chain for the automotive sector.
Paul Hardiman, Dawn Banner Automotive and mobility IATF 16949 consultant, trainer, and expert, and Devin Gage, IAOB Program Manager, undertake group discussions and mock audits at Mono-Group, Hungary, to demonstrate the skills required to be an IATF 16949 auditor.
Keep watching as Paul breaks down the good, and unsatisfactory practice methods before, during, and after onsite audits.
Remember to watch out for more audit videos within the office and factory environment.
Like and subscribe for more content like this!
On behalf of the IAOB and SMMT, we’d like to thank Mono-Group, Hungary, for allowing us to use their facilities and staff, to bring you this inside view on conducting onsite factory audits.
Watch and learn about best practices to gain insight into IATF 16949, the global Quality Management System Standard for the supply chain for the automotive sector.
0:08:25
IATF 16949 Auditor guide Part 2 | Discussion | Control Plan and Customer-specific requirements
0:07:32
IATF 16949 Auditor Guide Part 2 | Factory audit | PFMEA
0:06:02
IATF 16949 Auditor Guide Part 2 | Discussion | Customer specific requirements
0:05:57
IATF 16949 Auditor Guide Part 2 | Factory audit | variable measurement system analysis
0:05:52
IATF 16949 Auditor Guide Part 2 | Discussion | Production part approval
0:06:59
IATF 16949 Auditor guide Part 2 | Discussion | Measurement system analysis for variable equipment
0:08:28
IATF 16949 Auditor Guide Part 2 | Factory audit auditing customer specific requirements
0:08:58
IATF 16949 auditor guide | Auditing continual improvement
0:53:45
Awareness & Requirements IATF16949 Part 1
0:08:23
IATF 16949 Auditor Guide Part 2 | Factory audit | Auditing DFMEA
0:06:49
vid 8 IATF 16949 Auditor Guide Part 2 | Factory audit | SPC Shop Floor
0:05:12
IATF 16949 Auditor Guide Part 2 | Discussion | Attribute measurement system analysis
0:07:53
IATF 16949 auditor guide | Auditing quality objectives
0:07:11
IATF 16949 Auditor guide Part 2 | Discussion | Design failure mode effect analysis
0:11:44
IATF 16949 Auditor Guide Part 2 | Factory audit | Attribute measurement system analysis
0:07:16
IATF 16949 Auditor Guide Part 2 | Discussion | SPC
0:05:39
IATF 16949 Auditor Guide Part 2 | Factory audit | Part approval
0:05:27
IATF 16949 Auditor Guide Part 2 | Discussion | Process capability
0:03:31
IATF 16949 auditor guide | Thank you
0:06:50
IATF 16949 Auditor guide Part 2 | Discussion | Process failure mode effect analysis
0:08:48
IATF 16949 Auditor Guide Part 2 | Factory audit | SPC process capability
0:07:38
IATF 16949 Auditor guide Part 2 | Discussion | Introduction to Measurement System Analysis
0:06:32
IATF 16949 Auditor guide | Auditing the cascade of objectives to the shop floor - Factory Audit
0:07:41
IATF 16949 Auditor guide | Auditing continual improvement - Factory Audit
Комментарии