2009-2018 2019 Ram 1500 Classic Rear Coil Spring Swap TufTruck XHD TTC-1211 Replacement How To 4WD

Another thing with Ram 1500 trucks nowadays is the suspension is super soft and they don't hold much weight. Swapping out the stock springs with TufTruck Heavy Duty springs stiffens the ride quality and ability to haul stuff squatting half of what you would with stock springs, all things same.

Be sure to check out my other helpful how to videos!

[randydue]

I just installed the same coils on my 2016. It was soft since new and has gotten worse over the last 7 years. This made a dramatic difference. Your procedure was a lot simpler than others I saw. Not sure why some people take the wheels off and unbolt the sway bar.

[StarKnight]

i might do both my springs and shocks


but this is simple and straight to the point!

[weenttaguy]

Excellent, I would have changed out the shocks too! That's what I was looking for in the first place and you's guys showed up! 👍

[knivesinmediaog]

Brippity brop, the jacking don't stop.

[TheStudderman]

You guys made my job A LOT easier. Thank you.
I definitely need to do my rear shocks, Im having a lot of body roll on highways. I just hit 200k, so I definitely need a shock upgrade on my 2012 Ram 1500 Laramie.

[johnnyp]

I have a 2020. Can I use this same method to change the springs?

[brandonmagnan]

Who loosens a bolt by turning the bolt and not the nut?!?

[garystone]

I love the simple technique you used. The others out there removed lots of other components which, obviously, wasn’t necessary. I also upgraded my bump stops at the same time.

[nivekoch]

You keep calling struts shocks.. shocks don’t have a bolt, struts do. Thanks for the video, definitely helpful

[MichaelGallagher-nw]

Great.. not cluttered with unnecessary talking.

[JoshJorg]

I'm installing these tomorrow with 2" spacers and Fox 2.0 shocks.

Then Bilstein 5100 lifted coilovers in the front with JBA UCAs

[saperka]

I have 2010 Ram, and I want to know if 2014 and 2009 springs have some difference? On Mopar site I see, that 2010 and 2014 rear coil springs have different part numbers, but some non-original springs are 2009-2018 and some 2014-2018. Would 2009-2018 springs really fit my car?

[jacoblamoreau]

Does doing this effect ride height. I’ve got 1.5 inch level in the rear, and want stiffer shocks but the same level look. Thanks for help

[regconrad]

Thanks I got some tiff truck springs for my 5500 Dodge there 1.5” shorter wondering if I have the right springs it says on the box 55000 Dodge mines a tradesman edition I gave the lift shop all my info

[andrewfell]

i figured it was just as easy as remove shock bolts and jack the truck by the frame. i plan to do this and add a 1.5" spacer to go with the 2" front lift

[darrentoth]

I just ordered a set of Tufftruck variable springs and was looking for some install info, awesome video, thank you very much!!! Some others disconnected the sway bay, I take it that is not necessary?

[derekowens]

Has any installed these springs with a level kit? Do you need the rear spring spacers? My understanding being these springs lift the rear slightly.

[joeolvera]

Is there anything to look for after installing the spring then lowering the jack

[thagedorn]

do yours clank after install when going over bumps? I installed with bilstein 5100's and they make a lot of noise I'd sure like to fix if I could.

[cygnusa]

can you swap the shocks without removing the wheels too?