Leaky Spigot | Super easy fix | Outdoor faucet leak fix

preview_player
Показать описание
If you have a vacuum breaker crimped to your outdoor faucet, its hard to get rid of it. If it starts leaking on the side, then there is a easy fix you should try before calling your plumber.
In my case it was a 30 cent O-Ring that did the trick. Hope this helps.

Рекомендации по теме
Комментарии
Автор

I appreciate the knowledge, but I appreciate your dog going after the water even more!

pamelaforth
Автор

I enjoyed watching your dog trying to get a drink every chance they could.😆😆

angietorres
Автор

Thank you! Thank you! Thank you! I could not find these O-rings locally, so thank you very much for letting me know where to get them. Now I can finally use my outdoor faucet. I sprayed the faucet with dry silicone spray the day before the rings arrived from Amazon and it works perfectly now. Awesome video!

niecyc
Автор

I have the same vacuum breaker with the same leaking issue. I ordered the o-rings and replaced the top and bottom o-ring and now it works like new(mine is about 20 years old). Glad I found this video before sawing off the breaker(the set screw would not come out). Thanks for the video!!!

ilturnf
Автор

Wow, just wow! This video is an absolute game-changer! It's like stumbling upon a pot of gold at the end of the rainbow. Not only did it leave me feeling super cheerful, but it also helped me save a boatload of cash! I mean, who doesn't love a good money-saving tip, am I right? Huge thanks to the creator for sharing this happiness-inducing content with us. If you're looking for a mood boost and some extra cash in your pocket, this video is where it's at. Keep spreading those good vibes! 🌞💰

shiveshpandey
Автор

Thank you! This was so helpful, and i appreciate that you walked through it step by step! The dog is a bonus 😊

kjerstibohrer
Автор

The dog. 🤣🤣

New house, new hoses with non-worn washers, and the damn connection still leaks. I’ve tried several connections: hose to spigot, timer to spigot, shut-off to spigot. I even used plumber’s tape and that didn’t work. It’s so damn frustrating. It shouldn’t be this difficult to get a connection that won’t leak.

SomeGuy-cwrw
Автор

Great video and love the black Lab. Do you have a link where you got the o-rings? I can’t find them anywhere based on the info on the package - thanks!

brianhumphrey
Автор

I have this female connector that has a rubber seal (complete seal) inside ... If I use a pointer to press it... It doesn't press. As if water can't pass. What's that?

AzSah
Автор

Can you move? Really?? Can you move? Hahaha I miss my lab he was always in the mix 😂 My lab try to like nitro fuel in my RC car video lmao

YungiinTFU_K
Автор

On my hose Bibb, water is leaking from the relief hole. How to fix it?

jennyke
Автор

My front bib is exactly like that. It is always leaking when I turn it on. I think the dog is thirsty.

VigilanteMian
Автор

Hello...you mentioned you bought the new o-rings on amazon...could you possibly send me a link for the item, I cannot find it anywhere on the Amazon site...

matthewperegoy
Автор

didnt work for me; i have exactly the same vacuum breaker with the black plastic piece. putting in the new washer, it does not set like the original washer because the original washer is still there. your video shows the original washer and it looks like you set the new washer under it but there is no slot so it can fit under the original washer so when you push down the black piece it just pushes the new washer down. unfortunately cost me $20. word of warning, just cut off the vacuum breaker with a dremel

joe-mvcu
Автор

What brand of vacuum breaker (back flow preventer ) do you have? I have the same as you but it to old i don't know the brand!

hailam
Автор

Where to buy the ring on the Hose Bibb Vacuum Breaker? What is its name? Thanks.

jennyke
Автор

So after 12 hours you called the plumber

accousticpahadi