Rack N Roll / Rack N Ride MX Carrier 2021 Assembly Tutorial

This video is an in-depth tutorial on how to assemble your Mx carrier.

5 Year Structural Warranty and Designed for serious off-road use.

There is no better way to transport your bike.

Once you pull a bike down 35mm by the pegs/frame you’ll never use tie downs again.

Bike is super secure and it doesn’t compress your forks, will not even hold a fork saver in place.

Dropping your front wheel in a hole and yanking your bike down with tie downs is caveman stuff.

This new model will handle bikes up to 180kg.

RH LED Bracket now rotates downwards allowing lower clearance bikes to be loaded.

The Rear Wedge can also be moved forwards for 17″ or 19″ Wheels.

The Nose Cone can take 17″, 19″ or 21″ Wheels.

This model can load RH or LH side.

Main Bar is 50 x 5mm Orrcon Aust Tube Mill SHS with 4mm mounting plates

Carrier is supplied with everything needed to use it: Snap Hooks, Turnbuckles, Shackles, Loading Ramp, Anti Tilt Bracket with Packer Plates for snug receiver fit, Strap to stop turnbuckles vibrating loose.

Price includes LED light kit with number plate light plus a place to bolt an accessory plate where it shines, 7 flat plug

[paulsouthland]

Great product! Not bad tutorial, you didn't cover the wiring pin attaching the vehicle. We've found the reversing lights don't work, however we're checking our connections.

[leanit]

If case it might help, in the US, I bought a Curt 4-way flat connector part 58031 to connect to my factory wired Subaru trailer hitch wiring connector. Was $4.99 at autoparts store. I hooked from car / new connector to carrier: White to White, Yellow to Yellow (left turn), Green to Red (right turn), and Brown to Black (lights). Brake and turn signal lights work, your results may vary.

[불도저-rz]

Which one do you like better, steel or alloy?
What's the popular model?
Electricity is American 4-pin?