What To Do If Your E Bike Won't Start | Common E-MTB Problems

There's nothing more frustrating than wanting to go for a ride but your E-Bike won't turn on or start; here's Chris with some common EMTB problems and how to resolve them ⚡️

Error codes can normally be fixed by turning the system off and on again, check that all the cables and battery are connected correctly, and that the head unit battery is charged if your system has one.

Did you find these tips helpful?

Watch more on EMBN...

🎵 Music - licensed by Epidemic Sound
Half Time - Yellowbase
Before Chill - Yomoti

Submit your content here:

The Electric Mountain Bike Network (EMBN) is dedicated to igniting your passion for electric mountain bikes (eMTBs) by taking your riding further, faster and further than ever before.

EMBN is dedicated solely to covering eMTB from every angle: from demystifying electric mountain biking, to inspiring you to go electric, helping you understand what you need, where and how to ride, and how to get the best from your eMTB experience.

Every week, of every month we bring you videos on...

The know-how…
The skills…
The tech…
The inspiration…
...to go faster and explore more!

EMBN is mountain biking… fully charged: the same thrilling freedom – only faster, going further, and more liberating than ever before.

Join the EMBN community:

Thanks to our sponsors:

[lastlaf]

I encountered this issue on my Specialized Levo Expert with the plug in on the motor housing. Once with a slightly oxidized contact and another where it wasn't fully engaged. To help prevent oxidation a slight application of a silicone lubricant keeps the electrical contacts moisture free. Happy Trails.🤜🤛

[cliffkennell]

Fantastic video. You saved me a trip to the shop and some quid. Cheers mate.

[sterpumihai]

regarding the magnet, I had an issue with the motor shutting down frequently for no apparent reason until I discovered that the magnet was full of dirt; cleaned it nicely and never had a problem with the motor since!

[donaldjames]

I just watched your video it helped me a lot I managed to make my bike work thank you 😁

[JamesLorentzen]

Another very relevant & helpful video 👍🏻

[gs]

I just want to rise a comment on the E010 error if you are riding Shimano E8000. I was recommended by Canyon Service to clean the battery connectors when that error appeared with a connector cleaner and it worked. I faced that problem to month ago and so far so good.

[chriskros]

My Scott E Genius works perfect any issues with Shimano E8000.
I did some protections and "improvements" using isolating tape 😎. It is important the battery can not move in the socket and space inside frame where battery is placed must be clean.
The integrated battery is easier to keep clean.

[aminkazemi]

Your first tip fixed my bike issue. Thank you.🙂‍↔️

[valerytalma]

You helped me identify the problem : wire from controller to battery.

[SledPemberton]

I has the tiniest piece of rock that was stopping a good connection at the battery connection. It also was a bit magnetics so didn't want to blow off. With my Norco Range connection down by the motor and not totally sealed I can see that area is susceptible to dirt.

[dakotafraley]

Thank you. I was wondering what had happened to my bike. You helped me out than you

[slaughteroce]

Just installed bbs01.
Motor worked on ground test before installing but motor won’t Run.
Bought two motors and the other does the same.
These videos are very helpful but I feel I’m missing something.
Any ideas?

[bendoddceramics]

Just got my brand new Commencal Meta Power SX Signature today, did everything correctly, fully charged the battery, checked all connections but won't turn on at all, nothing! Any one else had this?

[MrJpaulo]

There are reports from users that the "bottom bracket" bearing start to playing after one or two thousands of kms. Do you know if the Shimano engine has some maintenance like the bosh engine like you showed in one previous episode? And if it has, you could how make an episode about that?

[uknavynige]

I have a shimano 6100 system and I can't find a diffinative information where to place the speed sensor magnet, do u know where is optimum position. I can't find details anywhere. I know bosch has a line on it but I can't see anything on the shimano.

[MrLaurencebourne]

I ride a Voodoo Zobop e mountain bike with Shimano Steps 7000 motor.
Twice I’ve had a 013 error code appear and today this code appeared again whilst riding.The error display looked slightly different generally larger characters.
I can clear it by switching off for about 5 minutes.
I’m thinking about taking it back to the shop see if it can be sorted.

[TheBikerbanditboy]

It’s nice, it honestly the w013 code still to this day no one can ever explain what it means and how it should be reset or dealt with....

[groovejet]

My mates Carreras battery had problems. There’s a smaller pcb inside the battery enclosure, the connector sheared off the main pcb.
We’ve soldered the connector (approx 10 terminals)
He said he’s tried to charge it but nothing 🤔 It won’t charge.
We made sure the solder didn’t flow between the adjoining terminals. So I’m wondering if it needs waking up?
Before soldering, we disconnected any connectors in the pcb, & wore a anti static wrist band. 👌

[jessehyttinen]

And what if you get W013 without touching pedal, LBS cannot reproduce fault and Shimano says its impossible? Also 010 sometimes. Almost every longer ride ends up with getting back without assist.

[HeathenRides]

My levo just stopped working short while after getting a new motor, Im so unlucky with this, after saving up in gift cards for myself for 18 months, It's also kind of my wheelchair because I have an injury sending a feeling of electric shock in my spine when taking steps, but I feel no pain when pedaling ebike