2005-2023 Tacoma Rough Country 3.5' Suspension Lift Kit Review & Install

Take Your Truck to New Heights. This Rough Country 3.50-Inch Series II Bolt-On Suspension Lift Kit with Premium N3 Shocks and Rear Leaf Springs will increase the ground clearance, while maintaining factory ride quality. It will level the front with the rear of your Tacoma and comes with an amazing amount of features.

\What's in the Box? With this lift kit, you get the rear shocks, 2 forged aluminum upper control arms, loaded N3 struts, rear leaf springs, vertex adjustable coil-overs, differential spacers, u-bolts and all the installation hardware you'll need.

Warranty. There is a lifetime replacement warranty on the system and 3-year warranty on the shocks.

Intro - 0:00
Features - 0:51
Construction - 1:46
Price - 3:13
Install Difficulty - 3:56
Full Install - 4:16

Item TT14589
----------------------------------------------------------------

#tacoma #tundra #4runner

[yangxai]

good job. brother. I'm bought some lift kits on your online store and this video help me understand follow the step by step n easy installed. Thank you

[brandonarnold]

Just to add a bit here. The long bolts for the upper control arm do not easily pass up into the engine bay. The side wall you can see is bent up in the video he does not show that but its clear it was done. Also the inside fender wall on the inside of the engine bay especially on the drives side makes it very difficult definitely you will have to use a hammer and a pry bar to bang it and push it past the frame, after you get it out you can grind off the bolts washer flange and it goes back a lot easier, other than that every thing is exactly right, your steering control arms came off a lot easier than mine though.

[Fenianboyo]

Does the Rear Shock not offer a sock for the Piston rod? Seems like it would be something simple to add and look cleaner/more finished.

[BlueSTI]

Why not show the driver side UCA install thats the hardest side. I ended up taking a grinder to the bushing on the UCA bolt cause i couldnt get it to come out even after bending alot in the inner fender and engine bay. The install isnt easy as these videos so be prepared

[kawi]

Anyone out there running aftermarket lower control arms with this kit? Looking at the lowers from tacoma beast to go along with this kit

[mariodiaz]

Will front cv axel boots break with this lift are angles ok

[alexanderjohnson]

Is the front and back both lifted 3.5" with this ?

[bwood]

will this rub at all if you remove that front plastic part under the front end

[ClaytonBriscoe]

Another “mechanic “that remove the tie rod to get the shock out.
Only three bolts need to come off the front end to get the front suspension out, the two arm to lower spindle bolts and the one swaybar linkage bolt to the spindle. That’s all that needs to come out to get the front suspension out and back into these things.
This also goes for the 4runner

[ErickGaray-zz]

I bought the 3.5in lift kit from rough country for my Tacoma, it’s the $800 one. It didn’t come with the differential washers. Do I still need to make a cut on the bracket for the differential? Or is it fine to leave like that?

[yojuanjose]

Is there a 4” lift kit similar to this one?

[Pfillwieffer]

Just installed mine..WHY is the nose diving?!?!

[scottfergusson]

Any reports on vibrations while driving ??

[selineramos]

On this 3.5 lift what size of wheel and Tire can I run? I have the cab mount chopped and have already did some trimming, some plastic and hammering on the pinch welds ect, what will be the widest tire can I get away with, would like 12.50, tire of the pizza cutters tires. I'm running 285s 70 16 Gladiator MT tires, on stock wheels. Thank you for any info you can give me.

[Pfillwieffer]

Why is the nose diving, why is the truck not level I’m annoyed

[bananaking]

would have been a good time to use a $10 can of lanolube spray on all that rusty crap