ACS Gas Training - How To Use A Flue Gas Analyser - Testo 310 - Kane 456

Gas training. Plumbing Training Video’s for Gas Plumbers and Plumbing Apprentices.
Gas training tutorials - How to use a FGA correctly.
Today I am at Viva Training Academy and are explaining how to use a flue gas analyser.
We have a Testo 310 and also a Kane 458 Flue gas analyser.
how to use a flue gas analyser and where the probe should be located to test the flue gas.
You will now need to know this for your acs gas training.
combustion analyzer are now part of the ACS
You will need to show how to use a combustion analysis
flue gas analysing a boiler and the correct location of the probe.
flue gas analyzer
flue gas analysis
gas engineer uk
gas engineer
gas training videos
flue gas analyser test
flue gas analyser readings explained
testo 310 combustion analyzer
testo 310 instructions
Kane 456

[pgaz]

4/90, 000 is 0.0000444. Sorry to be a stickler. Great informative video. Will be great for the apprentice to understand things, it’s like having a one to one with an ACS instructor/assessor.

[recklessJet]

Thanks Allan especially that last part helps alot putting different boilers into service mode min/max.

[efrygasservices]

Great video Allen. Viva are super helpful. 👍

[guinnessdublin]

Another great video guys, with the ratio calculations well explained Big Thanks! 👍🏻

[andrewmason]

This is great Russ 👍 thanks for all the vids they really help with my studies

[warrenfegan]

Thanks for the video guys. Think I’ll go with Kane when I get qualified. 👍

[stevebeard]

Good video. I would like to see gas testing and CO testing in a caravan. I think this would be useful to some people

[tommyblackman]

Great vid Allen, how about boiler or appliance working pressure and coming across more than 1mb drop etc

[adroitaddy]

An other Great video as usual, thanks Allan

Allan, a request for you to make a video covering Regulations for ACS exams, how to attempt them and complete that part with ease, Thank you

[nickbleako]

Well explained video Allen & Russ! Just one thing, shouldn’t the ratio on the low rate have been 0:00004, surely it can’t be higher than the high rate ratio.? 👍

[markking]

Just noticed this video as I’ve been working with the testo 310. Allen this analyser must be set for the correct area code before going any further, I noticed when the unit was switched on at the start it wasn’t set up for GB which is area code 2

[MasuMaurycy]

I use Testo 310 and the best one I think MRU Optima 7.

[rzbor]

Whitch O2 and CO sensors applicable for Kane 400 и Kane 940 anyzers? Many thanks

[jezlucas]

Sony troubles with my 2 new kanes on Monday I have to buy something new, totally shocking reliability

[Matteo-rsnk]

Hi. I’m currently doing my ACS, I just want ask you, what happened if you can’t put the boiler in service mode . For example because you don’t have the Manufacture instructions and can’t ceck how to do it .
What you do in this situation ? Run hot water for 5 minutes ? Thanks

[callumteevan]

Thanks for this video Allen and Russ, really does help, I’m about to go back and do my Gas part soon.

Question : Do these analysers pick up weather the flue has been correctly fitted or not? If the flue wasn’t correctly fitted, how does it show you? Thanks.

[mehmetaliciftci]

Hello, I'm following you from Turkey, can you turn on the Turkish subtitle feature?

[dukorouk]

Can it be used to measure fumes on trucks

[Dhaakat]

YOUR VIDEOS ARE VERY HELPFUL ALLEN.
WORCESTER GREENSTAR 37CDI KEEPS TRIPPING RCD, ITS STAYS ON FOR ABOUT A MINUTE AND THEN IT TRIPS RCD. NO LEAKES AND ALL WIRES SEEMS FINE.
CAN YOU PLEASE COULD IT BE THE FAN?

[pauls]

Alan pal what’s that testo 310 like they any good