stick welding lessons beginners should know

preview_player
Показать описание

Рекомендации по теме
Комментарии
Автор

"I have no clue what I'm doing and i want to teach others how to have no clue what they're doing"

jacobjackson
Автор

This guy couldn’t weld to save his life

michaelminn
Автор

Or maybe fucking slow down? You know, give the rod time to fill in the gap

Oyrou
Автор

Bro, no soy muy experto pero algo " BÁSICO" es limpiar, lijando, esmerilado, etc. El área donde vas a soldar.

Omar-artmexiclan
Автор

Essas demonstrações é uma grande oportunidade pra quem quer aprender pelo menos pra alguma coisa em casa

eltonpaiva
Автор

6013 is a low hydrogen rod, that should be used on harder steel and a 7018 should be used on this pipi

williamfowler
Автор

Put welding goggles on the camera and we'll see it the way you see it. Bro

mehmetkarayel
Автор

Things to do differently: clean the weld area THOROUGHLY. Tacked welds need less of a gap and a nice bonk of the hammer before cleaning/welding them. Less steep of and angle to allow build up of weld for one pass. Slow down a hair and make smaller dimes to avoid undercut.

lawrencemalcheff
Автор

Use 7018 on this and you wouldn't have to push like that. Not only that there was undercut on the top portion of the "Good weld"

tbetibd
Автор

Well at least he didn't tack this time as he use to do 😅

Blacksmith
Автор

why are so many people shitting on this guy and not making their own videos on how its "properly" made, just goes to show criticizing others is easier than doing it yourself

agustintorres
Автор

That rod angle is insane that the hell lol

conorwilliams
Автор

Fact Check
*
6013 is another Drag Rod !

DelbertCook-zpuv
Автор

Todos se quejan pero es la única vez que vemos a éste sujeto soldar de continuo, mal, pero de continuo al fin...

francogiorgetti
Автор

There are ditches created from melting the material around this weld you don't want those in a high quality weld.

nebelung
Автор

Я сварщик 3 рязряда но выполняю работы 5 рязряда в глубине 700 метров в шахте, и что я хочу сказать, там на глубине такая каша варить ржавые трубы не каждому сварщику, я бы посмотрел как вы там заварите

puwkyxs
Автор

If you're going to weld on rust and mill scale, 6011 is what you need.

RobertJohns-spkf
Автор

Nice under cut and a big pool right in the middle. Good job

bipolargods
Автор

Nice weld but always clean the material

giftedspring
Автор

If you want to teach others to weld then learn correctly yourself. If your not trying to teach then thats bright sparks for you.

MikeSchmitt-yp