novice welder may not know the best way to weld a thin square tube #howtoweldingforbeginners

[echonomix_]

I don't weld but if there's one thing I know about welding it's that everyone in the comments knows how to do it correctly.

[rjd]

Plot twist: the guy making the video is the novice welder.

[exploreMauritius]

“Nobody hates welders more than other welders” - Sun Tzu

[xtemptatixnx]

U are correct sir, thank u for showing us an example of a novice welder

[liberationk-training]

Today on how to make sure there’s slag inside your weld.

[RustyRed]

Novice welder may not know how to correctly weld thin wall tube.

- proves novice welders don’t know how to weld thin wall tubing.

[roberttill]

It would be better to tack the corners, then turn the tube as welding horizontally is easier than vertically. Then lower the Amps and use a thin rod that is matched to the thickness of the tube, rather than using the Universal rod.

[robtaylor]

A lower heat and a thinner rod would help.

[gateswidemobilecalffeeder]

At 1.3 million views, hes got paid alot more then any of us for a run of weld .

[Metalheart]

Don’t do what this person did, tack the corners and lay beads from one tack to the other- u spot weld a entire line ur fired 😕

[agc]

Using the "Stipple" technique whilst welding. Genius!

[piggugudu]

Watching this and reading the comments from experienced welders whilst having 0 knowledge of welding myself 😂 hmm yes all very sensible advice, I’ll keep that in mind just in case I ever have to do this 😅

[hunterontherun]

Didn't know tack welds is considered welding.

[diecastgoblin]

Glue would be stronger than that metal tube.

[bozo]

One of the best ways is to lay the bead over the joint rather than beside it.

[rceravolojnr]

200 tack welds later my gods man how hard is it to run a consistent bead!!

[urjzcqx]

Why didnt you just use a hot glue gun ?

[cexfjso]

Скоро фольгу от шоколадок сваривать начнем с такими ценами на металл. 🤔

[sweyn]

So much wrong with this whole thing. From the fact that there's absolutely no gap to the fact he just runs a series of tacks without chipping. Everytime it cools it forms a layer of slag

[FlaredSpace]

Another “tack welder” giving us the best welding tips ever