3D resin printing, tips, tricks and more 😊 UV Resin Putty Is it any good

3D resin printing, tips, tricks and more 😊 Printing flat off the build plate

For more videos like this, check out our Fully Supported Series and more on our channel.

#fyp #3dprinting #3ddesign #3dprintingtutorial #teaching #tutorial

Links to all our creators that we work with or just plain think are awesome.

Gaz Minis

Digital Dark

Exclusive 3D

Crippled God Foundry

Officer Rhu

Printed Obsession

Witchsong Miniatures

#teaching #tutorial #3dprintingtutorial #3dprinting

This tutorial assumes you have some experience with Lychee or other slicers.

Change Log

Thanks for watching.

My NEWEST Lychee Settings

Super Light and Light supports
1.10 - 1.22 bar diameter
0.10 - 0.22 tip diameter
3.10 - 3.55 tip length
raft - line/support triangle, or shape
bottom thickness on supports .30 - .25 - .45, raft is .50 (varies based on object mass)

Mediums on 1/24 scale or higher only
1.33 - 1.44 bar diameter
0.33 - 0.44 tip diameter
3.33 - 3.55 tip length
raft - line/support triangle, or shape
bottom thickness on supports .45 - .50 - .55, raft is .60 (varies based on object mass)

Heavy on terrain and heavy parts only
1.55 - 1.77 bar diameter
0.55 - 0.77 tip diameter
3.55 - 3.77 tip length
raft - line/support triangle, or shape
bottom thickness on supports .50, raft is .70 (varies based on object mass)

Happy printing!

Check us out on Instagram too:

[robinvandenakker]

like the video. nice info not only for this kind of moddeling.

[Stegpen]

Of all the models you could use you had to use that one

[Macabri_k]

you should put the lid on the tin when you got your portion out, esp when fumbling around with a UV light in its vicinity

[fen]

Anyone else reminded of Catherine Zeta-Jones in that heist movie from the early 2000s?

[dovmerrill]

Definitely a needed product for finishing and gap or hole filling. The sticky, gel-like consistency has some uses and probably can be thinned down slightly if you need a bit more flowability but not runny like using resin from a bottle would be. On the other side, having a less sticky, more “putty” like consistency, like “milliput” or like “plumber’s putty” (or any number of uv-curing or air-curing resin putties you can find at your hardware store, would be great from Funcrecol, if they wanted to make such a thing.

[SOLiDNiTROGENv]

11/10 model choice for a normal 3d printing video. You are out of pocket as hell.