because you can doesn't mean you should #diy #tools #powertools #repair #construction #hack

[ShockingTips]

Whats wrong with it. Worst case it breaks and you can just put the old anvil back. But in the mean time it acts as a driver and a wrench

[herbiehusker]

Mom, can we have Funk FPV?
We have Funk FPV at home.

Funk FPV at home.

[SmoothBrain]

1/2" for a 1/2" yes the anvil is no longer solid.

[WildoTheRubberFist]

This is a great upgrade for people that don't need the high torque of that impact.

[masjuggalo]

Drilling out the center really doesn't change the strength too much, but more importantly you're going to use a half inch impact gun to drive a quarter inch bit

[BillybobMcGee]

Bosch has been doing this already and it works fine

[cmonaghan]

It’s still a half inch anvil you just have the quarter inch drive in the center. Bosch has made these for a long time

[jonathanderbidge]

Depending on the anvil material. Honestly frames of vehicles and suspension components and other things that take far more abuse are generally hollow. I’m not concerned

[nathanvires]

That thing aint got enough cookies to break the anvil

[RamonBarrera-nsyc]

That's was actually 1/2" to 1/2" it just had a custom adapter built into it..

[smorris]

It isn't about breaking it. It has lost mass and, therefore, torque.

You gain an over powered .25 but loose .5 capabilities.

The uga duga doesnt duga as much.

[andrewdovenberg]

This is how Bosch impact drivers come out of the box. But those don't have nearly the power of an air powered ½". Not sure what power this one makes but it looks to be an impact driver.

[tonyfknb]

Why not use an adapter? Why do all that?

[jeremyjones]

If you can afford a 1/2 inch impact you should be able to afford a drill driver set 😂 😅

[nolankostka]

They didn't switch the ½ for a ¼ they fit the same socket on it

[Wizard__J]

You’re still using the impact for its IPM. This is still better than an adapter, so not sure what you’re going on about lol.

[JoshuaFurr-es]

The quarter inch is also a half inch on the outside

[mechanicallycreative]

Strip and break everything with 600ftlbs into a number 2 Philips.

[FazzixOfc]

It’s the same size drive… they literally replaced it with the exact same size

[alexharvey]

I had one of these and ran it until it caught fire, other than that it worked ok.. if i still had it id be using it to jack up my trailer for camping bc that doesnt need much torque. I didnt do the swap myself btw